INSTRUCTION MANUAL
GROWNSY Bottle sterilizer
MODEL
220-240V,50/60Hz,500W
NOTE
* The sterilizer should be placed on the horizontal place when it works. It should be used
continuously after one hour after cooling
* Power plug should be connected well.
* Keep the child away from the sterilizer while it is working to prevent being burned by
steam.
* The sterilizer is for indoor use only.
* To prevent burns, do not put your hands on the top lid and never cover it
* Never immersed in water for cleaning.
* If the power cord is damaged, it must be replaced by the GROWNSY manufacturer to
avoid a hazard.
* This sterilizer is not intended for use by person (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the sterilizer by a person
responsible for their safety.
* Keep out of the reach of children
Specification:
Power
plug and
Sterilizer Base
bottle clip
Basket for small parts
Sterilizing rack
Steps for usage
Product Name
Bottle sterilizer
Model
LS-B321
Power
220-240V,50/60Hz
Rate
500W
Step 1: Put the cleaned baby bottle upside down on the sterilizing rack.
Step 2: Fix the basket for the small part on the rod.
Step 3: Put the nipple and the accessories into the upper basket.
Step 4: Pour 75ml of distilled water (Be sure to use distilled water to prevent scale) into the
sterilizer.
Step 5: Put the full set of sterilizing rack on the sterilizer.
Step 6: Cover the top lid and plug in. If the power light is off. Press the ON/OFF button and the
sterilizer will start working.
INSTRUCTION
1. Add 75ml distilled water on the heating plate, put the bottle on the sterilizing rack then
cover the top lid.
2. Plug in and press the ON/OFF button. Power light on indicates that the sterilizer start
working.
Taking into account health issues, the sterilizer should be dedicated to mother and
baby supplies, not for other purposes. After use, the bottom of the sterilizer should be
cleaned and air dried.
Taking into account the continuous and normal use of the sterilizer, remember to
descale on time
Cleaning:
*Plug off the power before cleaning.
*Pour out the water and mop it with soft cloth after use.
*Clean the top lid and bottle accessories with water and detergent.
It is recommended to descale the bottle sterilizer every four weeks to ensure it continues to work
efficiently.
1.Mix 50ml/1.7 oz of white vinegar with 100ml/3.4oz of cold water to descale the bottle warmer.
Switch on the bottle warmer, select the milk warming setting and let the appliance operate for 10
minutes. Leave the solution in the bottle warmer until all scale has dissolved.
NOTE:
1. You can also use citric acid based descalers.
2. Note: Do not use other types of descalers.
