Loading ...
Loading ...
Loading ...
Problem solving guide
37
Problem Cause and remedy
The temperature display
lights up but the refri-
geration appliance is
not cooling.
Demo mode has been activated. This allows the refri-
geration appliance to be presented in the dealer
showroom without the cooling system being
switched on. This setting is not needed for domestic
use.
Switch off demo mode by running the appliance self-
test:
Switch the refrigeration appliance off and back on
again after 5minutes.
Within the following 10seconds, touch the Super-
Cool sensor control for 3–5seconds until an
acoustic signal sounds.
The self-test starts and a long acoustic signal sounds
after a short time.
- If 2 acoustic signals sound at the end of the self-
test and the temperature display shows the set
temperature, your refrigeration appliance is ready
for operation.
- The refrigeration appliance reverts to normal opera-
tion.
- If 5acoustic signals sound at the end of the self-
test and the SuperCool function sensor control
flashes for 10seconds, a fault has occurred. Call
the Miele Customer Service Department.
The compressor is
switching on more fre-
quently and for longer
periods of time. The
temperature in the refri-
geration appliance is
too low.
The ventilation gaps have been covered or become
too dusty.
Do not block the ventilation gaps.
Dust the ventilation gaps regularly.
The appliance door has been opened too frequently.
A large amount of fresh food has been placed in the
appliance.
Only open the appliance door when necessary and
for as short a time as possible.
After a while, the temperature will return to normal by
itself.
The appliance door is not properly closed.
Close the appliance door.
Loading ...
Loading ...
Loading ...