Loading ...
Loading ...
Loading ...
BISSELL.com 9
After-Cleaning Care
For more tips on how to maintain your machine, visit BISSELL.com.
MAX
FULL
FORMULA
MAX
FULL
DO NOT EXCEED MAX FULL LINE
FORMULA
MAX FULL
MAX
FULL
DO NOT EXCEED MAX FULL
1. Remove the Formula Tank
by grabbing the sides and
pulling outward.
2. Release the Removable
Suction Lens by raising the
latch at the top and pulling
outward.
Note: Be sure to empty the
Dirty Water Tank prior to
removing the Brush Roll.
3. Sit machine upright on a
flat surface. Pull the latch on
the Brush Roll Cover Plate to
open. Grab the brush by its
handle and pull out.
Note: Pet Tool follows the
same steps.
MAX
FULL
FORMULA
FORMULA
4. Rinse all components and
allow to dry. See steps for
“Removing & Emptying the
Dirty Water Tank” on page 8.
5. Sit machine upright.
Replace the Brush Roll by
carefully lining up the opposite
end as shown.
6. Replace Brush Roll Cover
Plate by first sliding into the top
and then rotating downward
until “clicked” into place.
full
MAX
FULL
FORMULA
MAX
FULL
FORMULA
7. To install the Removable
Suction Lens, attach the front
lip to the front of the machine
near the Brush Roll. Rotate the
lens toward the machine until
“clicked” into place.
8. Click the Formula Tank Cap
back into place. Ensure it is
secure.
9. Replace the Formula Tank
back onto the machine until
“clicked” into place.
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from charger
before performing maintenance or troubleshooting.
NOTICE To reduce the risk of a leaking condition, do not store where freezing may occur. Damage to internal
components may result.
Loading ...
Loading ...
Loading ...