Kenmore 153332160 THE ECONOMIZER 6 GAS WATER HEATER

Owners Manual - Page 17

For 153332160. Also, The document are for others Kenmore models: 153.332110, 153.332318, 153.332362, 153.332418, 153.332462, 153.332562

PDF File Manual, 28 pages, Read Online | Download pdf file

153332160 photo
Loading ...
Loading ...
Loading ...
Operating Instructions
Lighting
_,WARNING
BEFORE LIGHTING [PROPANE (L.P.) GAS WATER
HEATERS]:Propane(L.R) gasisheavierthan air.Shouldthere
be a leak in the system,the gaswill settle near the ground.
Basements,crawlspaces,skirtedareasundermobile homes
(evenwhenventilated),closetsandareasbelowgroundlevelwill
serve as pockets for the accumulation of this gas. Before
attemptingto lightor relight thewater heater'spilotorturning
ona nearbyelectricailightswitch,beabsolutelysurethere isno
accumulatedgasinthe area.Searchfor odorofgasbysn_ngat
groundlevelinthe vicinityofthe appliance.Ifedor isdetected,
followstepsindicatedat "For YourSafety"on thecoverpageof
this manualthen leavethe premises.
Lighting and operating instructions are located on front of the
water heater, above or to one side of the gas control valve.
AWARNING
AN ODORANT ISADDED TO THE GAS USED
BYTHIS WATER HEATER.
FORYOUR SAFETY
IFYOU SMELLGAS:
Do nottry to lightanyappliance.
Do not touchanyelectricalswitch;do not useanyphonein
yourbuilding.
Immediatelycallyourgassupplierfrom a neighbor'sphone.
Followthe gassuppliersinstructions.
If you cannotreach your gassupplier,callthe fire depart-
ment.
_,WARNING
DO NOT force the gascontrolknob. Useonlyyourhandto
pushit downto lightthe pilot,or to tern it to "ON", "OFF"
or "PILOT". Never usea tool suchasa lever,wrenchor pli-
ers. Do not hit or damagethe Imob.A damagedknob may
resultin an explosionand seriousinjury.Ifyou haveproblem
turningthe Imob,callthe gassupplierimmediately.
CHECK FOR LEAKS
Be sure to check all your gas pipes for leaks before lighting your
water heater. Use a soapy water solution, not a match or open
flame. Check the factory gas,fittings after pilot is lit and gas con-
trol knob is still in "PILOT position. Then, check the fittings
when the main burner is turned "ON". Use a soapy water solu-
tion for this, too.
Figure 6 ]
I Figure 7 ]
I Figure 8 J
Figure 9 ]
INNER DOOR
17
Loading ...
Loading ...
Loading ...