Loading ...
Loading ...
Loading ...
MAI.TE.A.C,SC.EOUL
FILL IN DATES
.EGo .SE.V,CE f .YSERV,C E
DATES
B/ [ I //_
Check Brake Operation I
Check Tire Pressure _V' _ I
Check Operator Presence and
T Interlock Systems I_ I
R Check for Loose Fasteners V w V'7 Ik/
A Sharpen/Replace Mower Blades _b_s4
T Lubrication Chart If
0 Check Battery Level
R Clean Battery and Terminals If
Check Transaxle Cooling I_
Adjust Blade Belt(s) Tension V's
v',
Adjust Motion Drive Belt(s) Tension
Check Engine Oil Level _ V p
Change Engine Oil I_1_._ V r
E CleanAirFilter _:
: a Clean Air Screen
IG Inspect Muffler/Spark Arrester V w
Replace Oil FiRer (If equipped) I_1.=
N Clean Engine Cooling Fins
Replace Spark Plug i# # I/
v',Replace Air Filter Paper Cartridge
Replace Fuel Filter ;V'
1 - Change more often when operaling under a heavy Joad or in high ambient temperatures. 5 - If eq uippec_ with adjustable system.
2 - Service more often when operaUng In dirty 0," cius_ conditions. 6 ° Not required if equipped with mait_tenance-tree bC.lteP/.
3 - II equipped with OUfilter, change oil t_'e q/50 hours.
4 * Replace blades more often when mowing _n sandy soil
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To
receive full value from the warranty,
operator must maintain tractor as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and
help your engine run better and last
longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlock systems for proper operation.
• Check for loose fasteners.
7 *Tighten ln>rttaxle picot bc_t to 35 ft.qbs, maximum.
DO not overtighten.
, LUBRICATION CHART
• Tie Rod Ball Joints
_) Spindle
Zerk Zerk
_)Front Wheel
Bearing Bearing Zerk
Zerk
Sector
Gear
Teeth
i@Engine
OSAE 30 or 10w30 MOTOR OIL
_)GENERAL PURPOSE GREASE
@REFER TO Maintenance "ENGINE" SECTION
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
19 sparingly.
Loading ...
Loading ...
Loading ...