Loading ...
Loading ...
Loading ...
[e!': 1Ii tl'olAVl
Ex_eme caution should be exercised when you play back CDs encoded in DTS.
If you play back a CD encoded in DTS on a DTS-mcompatible CD player, you will only hear some unwanted noise that may damage
yottr speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player
before you play back a CD encoded in DTS.
2 Press SPEAKERS A and/or SPEAKERS B on
the front panel or on the remote control to
select speakers A and/or speakers B.
8P[AKERS
SPEAKERS
A B
or
Front panel Remote control
5 1 2
E
1-
-2
-4
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
INPUT
Front panel
or
Remote control
•Both SPEAKERS A and B can be selected.
•Make sure that the IMPEDANCE SELECTOR switchis
correctly set (see page 11).
3 Play the source.
4 Rotate VOLUME on the front panel (or press
VOLUME +/-on the remote control)to adjust
the sound output level.
Front panel
or
Remote control
Press MAIN ZONE ON/OFF on the front panel
again (or press STANDBY on the remote
control) to finish using this unit and set it to
the standby mode.
MA_N ZONE
Front panel
Remote control
15
Loading ...
Loading ...
Loading ...