Loading ...
Loading ...
Loading ...
HandleHeightAdjustment
Your mower is shipped with the handle in the higher
height position. To lower the height proceed as follows:
Remove the starter rope from the rope guide.
Disconnect the handle from the handle bracket
assemblies by removing the wing nuts.
See Figure 10.
Position each handle bracket assembly stud into
the top hole in the lower handle.
Each end of the lower handle must be placed in
same relative position.
Wing
Handle
Bracket
Figure 10
SECTION7: MAINTAININGYOURLAWNMOWER
GeneralRecommendations
Always observe safety rules when performing any
maintenance.
The warranty on this lawn mower does not cover
items that have been subjected to operator abuse
or negligence. To receive full value from the
warranty, operator must maintain the lawn mower
as instructed in this manual.
Changing of engine governed speed will void
engine warranty.
Some adjustments will have to be made
periodically to maintain your unit properly. All
adjustments in the Making Adjustments section of
this manual should be checked at least once each
season.
Periodically check all fasteners and make sure
these are tight.
Follow the maintenance schedule under Customer
Responsibilities to get quality performance from
your lawn mower.
CustomerResponsibilities
_ ._ o_
MAINTENANCE e,e_ %_ _ _ _ &_,_"_ SERVICE
SCHEDULE e_ ._,_, _e_ _e_ ._o_' no DATES
Lubricate Wheels
I-
0 Lubricate Blade Control
Clean Deck <_
n,"
n BladeCare _
CheckOil
Change Oil _
Replace Air Filter
Clean Engine _
Check Spark Plug R_ R_
Check Spark Arrester (ifany) q_
11
Loading ...
Loading ...
Loading ...