Loading ...
Loading ...
Loading ...
Continued
621
uuHonda Sensing® uLane Keeping Assist System (LKAS)
Driving
The system can be used when the following conditions are met.
• The lane in which you are driving has detectable lane markers on both sides, and
your vehicle is in the center of the lane.
• The vehicle is traveling between about 45 and 90 mph (72 and 145 km/h).
• You are driving on a straight or slightly curved road.
• The turn signals are off.
• The brake pedal is not depressed.
■
How to activate the system
1. Press the LKAS button.
u LKAS indicator (white) appears on the
gauge.
The system is standby.
u If traffic lane lines are detected, white
lines appear on the gauge.
*1: Models with A-type meter
*2: Models with B-type meter
*3: When using the +R gauge
*
■
When the System can be Used
1When the System can be Used
If the vehicle drifts toward either left or right lane line
due to the system applying torque, turn off the LKAS
and have your vehicle checked by a dealer.
Be sure to keep the following below to activate the
system properly;
•
Always keep the windshield around the camera
clean.
•
When cleaning the windshield, be careful not to
apply windshield cleanser to the camera lens.
•
Do not touch the camera lens.
•
Do not attach a sticker to the area around the
camera.
If LKAS button is pressed when the system can be
used, LKAS is on without standby.
When you completely disable VSA®, you cannot use
LKAS.
Models without Auto Idle Stop
White lines
LKAS indicator
(white)
*1
*2
LKAS Button
*2, *3
White lines
LKAS indicator (white)
LKAS indicator (white)
White lines
* Not available on all models
23 CIVIC HATCHBACK TYPE R-31T406100_03.book 621 ページ ２０２２年６月２３日 木曜日 午後９時２８分
Loading ...
Loading ...
Loading ...