Loading ...
Loading ...
Loading ...
171
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)
Instrument Panel
■
Change gauge design
You can change the gauge design to a round or bar design.
1. Press the right selector wheel when you
select the Customize display on the driver
information interface.
2. Roll the right selector wheel to scroll to
select Gauge design, then press the right
selector wheel.
3. Roll the right selector wheel to scroll to
select your desired settings, then press the
right selector wheel.
You can check if there are any active warning messages.
1Change gauge design
When using the Round minimal or Bar minimal
gauge design, a simplified display is used when ACC
with Low Speed Follow
*
is in operation.
The +R gauge design cannot be changed.
■
Warnings
1Warnings
If there are multiple warnings or informations, you
can roll the right selector wheel to see other
warnings.
* Not available on all models
23 CIVIC HATCHBACK TYPE R-31T406100_03.book 171 ページ ２０２２年６月２３日 木曜日 午後９時２８分
Loading ...
Loading ...
Loading ...