Maytag MED7230HW1 Dryer

Installation and Care Instructions Manual - Page 14

For MED7230HW1.

PDF File Manual, 88 pages, Read Online | Download pdf file

MED7230HW1 photo
Loading ...
Loading ...
Loading ...
14
B
C
3. Connect neutral wire
Place hooked end of neutral wire (white
or center) (C) of direct wire cable under
center terminal block screw (B). Squeeze
hooked end together. Tighten screw.
Connect remaining wires
4.
Place hooked ends of remaining direct wire cable wires under
outer terminal block screws (hooks facing right). Squeeze hooked
ends together and tighten screws. Finally, reinsert tab of terminal
block cover into slot of dryer rear panel. Secure cover with
hold-down screw. Now, go to “Venting Requirements.”
Optional 3-wire Connection:
You must verify with a qualied electrician that this grounding
method is acceptable before connecting.
1. Prepare ground wire appliance
installation
B
A
E
Remove center terminal block screw (B). Remove neutral bond
wire (E) from external ground conductor screw (A).
B
E
C
Connect neutral bond wire
and neutral wire
2.
Connect neutral bond wire (E) and neutral wire (white or center
wire) (C) of power supply cord or cable under center terminal
block screw (B). Tighten screw.
Connect remaining wires
3.
Connect remaining wires to outer terminal block screws. Tighten
screws.
A
G
Connect external ground wire
4.
Connect a separate copper ground wire (G) from the external
ground conductor screw (A) to an adequate ground. Finally,
reinsert tab of terminal block cover into slot of dryer rear panel.
Secure cover with hold-down screw. Now, go to “Venting
Requirements.”
Loading ...
Loading ...
Loading ...