Soleus WS124E02 Air Conditioner

User Manual - Page 7

For WS124E02. Also, The document are for others Soleus models: WS1-15E-02, WS1-18E-02, WS1-24E-02

PDF File Manual, 19 pages, Read Online | Download pdf file

WS124E02 photo
Loading ...
Loading ...
Loading ...
INSTALLATION
Window Preparation
Please read all instructions prior to installing your air conditioner. Two people are recommended to install this product. If a new
electrical outlet is required, have the outlet installed by a qualified electrician before installing the unit.
Before installing the unit, check the dimensions of your window to make sure the air conditioner will fit. This unit is made to fit
inside a standard double-hung window. Make sure the window is in good shape and able to firmly hold the provided screws. If
not, make repairs prior to installing the unit.
Storm Window Requirements
A storm window frame will not allow the air conditioner to tilt properly which will keep it from draining properly. To ad-
just for this, attach a board or piece of wood to the sill. The board or wood piece should have a depth of at least 1 1/2”.
Make sure the board or piece of wood is approximately 1/2” higher than the storm window frame. This will allow the air
conditioner to tilt enough for proper drainage (See FIG. 2).
Prior to Installing the Air Conditioner
1. Check for anything that could block airflow. Check the area outside of the window for things such as shrubs, trees,
or awnings. Check the inside area to make sure curtains, drapes, or blinds will not prevent proper airflow.
2. Check the available electrical outlet. The power supply must be the same as shown on the unit serial nameplate
(located on the left side of the unit, near the front faceplate). Be sure the outlet is close enough for the power cord to
reach.
3. Carefully unpack the air conditioner. Remove all packing material and make sure the floor is protected when remov-
ing. Due to the large size of this air conditioner, two people should move the unit together.
When handling the unit, be careful to avoid cuts from the
sharp metal edges and aluminum fins on the front and rear
coils.
Model WS1-15E-02 WS1-18E-02 / WS1-24E-02
Unit Height 17 3/4" 18 5/8"
Unit Width 23 5/8" 26 3/8"
Min. Window Opening (See FIG 1) 18 3/4" 19 7/8"
Min. Window Width 28 1/8" 30"
Max Window Width 41 3/4" 50 "
18 3/4", / 19 7/8"MIN
18 3/4" / 19 7/8"MIN
FIG.2
FIG.1
Loading ...
Loading ...
Loading ...