Loading ...
Loading ...
Loading ...
4
IMPORTANT SAFETY INSTRUCTIONS
Read and follow the below instructions and pre-
cautions for unpacking, installing, and servicing
your
appliance:
IMPORTANT
• Remove all tape and packaging before using the
appliance. Destroy the carton and plastic bags
after unpacking the appliance. Never allow
children to play with packaging material. Do
not remove the wiring label and other literature
attached to the range. Do not remove model/
serial number plate.
• Cold temperatures can damage the electronic
control. When using this appliance for the rst
time, or when the appliance has not been used
for an extended period of time, be sure the
appliance has been in temperatures above 32ºF
(0ºC) for at least 3 hours before turning on the
power to the appliance.
• Never modify or alter the construction of the
appliance by removing the leveling legs, panels,
wire covers, anti-tip brackets/screws, or any
other part of the appliance.
• Be sure to have an appropriate foam-type re
extinguisher available, visible, and easily acces-
sible located near the appliance.
Avoid re hazard or electrical shock. Failure to
follow this warning may cause serious injury, re,
or death. Avoid re hazard or electrical shock.
Failure to follow this warning may cause serious
injury, re, or death.
GROUNDING INSTRUCTIONS
Avoid re hazard or electrical shock. Do not
use an adapter plug, use an extension cord, or
remove grounding prong from the power cord.
Failure to follow this warning may cause serious
injury, re, or death.
Proper Installation—Be sure your appliance is
properly installed and grounded by a qualied
technician. In the United States, install in ac-
cordance with the National Fuel Gas Code ANSI
Z223.1/NPFA No. 54, latest edition and National
Electrical Code NFPA No. 70 latest edition, and
local electrical code requirements. In Canada,
install in accordance with CAN/CGA B149.1 and
CAN/CGA B149.2 and CSA Standard C22.1,
Canadian Electrical code, Part 1-latest editions
and local electrical code requirements. Install
only per installation instructions provided in the
literature package for this appliance.
For personal safety, this appliance must be
properly grounded. For maximum safety, the
power cord must be securely connected to an
electrical outlet or junction box that is the cor-
rect voltage, is correctly polarized and properly
grounded, and protected by a circuit breaker in
accordance with local codes.
It is the personal responsibility of the consumer
to have the appropriate outlet or junction box
with the correct, properly grounded wall recep-
tacle installed by a qualied electrician. It is the
responsibility and obligation of the consumer to
contact a qualied installer to assure that the
electrical installation is adequate and is in con-
formance with all local codes and ordinances.
240V grounded
wall receptacle
Power supply
cord with 4-prong
grounding plug
This appliance is equipped with a 4-prong grounding
plug for your protection against shock hazard and
should be plugged directly into a properly grounded
receptacle.
See the installation instructions packaged with this
appliance for complete installation and grounding
instructions
IMPORTANT
WARNING
Loading ...
Loading ...
Loading ...