Loading ...
Loading ...
Loading ...
2
4
Setup and Installation
11
•
•
•
•
Installation Instruction
3
EE
AA
DD
Mark screw position on your wall.
Drill a hole at the marked point. Insert the Mounting Anchor (EE) into the hole.
Fasten the Mounting Screw (DD) into the anchor. Leave about 1/4” of the screw threads exposed.
Align the Audible Alarm (AA) mounting hole onto the screw. Adjust the screw if necessary to hold better.
•
•
•
•
NOTE: You can skip this next step
if installing on wood or siding.
NOTE: This device is normally intended to be powered
by a USB power adapter. Use batteries only as a
backup power source. You cannot damage the device
by using it without batteries.
EE
CC
AA
CC
CC
Setting Up Your Device
Remove the Audible Alarm (AA) back cover by turning it counterclockwise.
Insert two 3.0V CR123/CR123A Lithium Batteries (BB) or remove the tag if batteries are inside the device.
Place the back cover on the Audible Alarm (AA). Make sure the mounting hole is at the top. Close the back cover by turning it clockwise.
Follow instructions in the App Setup section to set up the device in the Feit Electric app.
•
•
•
OPEN
CLOSE
AA AA
AA
BB
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www.feit.com
Connect Using Micro USB Cable
Connect the Micro USB Cable (CC) to the Audible Alarm (AA).
Connect the other end of the cable to a USB power adapter (sold separately).
Plug into any indoor receptacle.
Loading ...