Loading ...
Loading ...
Loading ...
12
Connecting power supply
1.
Put the connector of the power
cord into the AC (AC inlet) of
the projector.
3.
)LUPO\SOXJWKHSRZHUFRUG¶VSOXJLQWRWKH
outlet. In a couple of seconds after the power
supply connection, the POWER indicator will
light up in steady orange.
Please remember that when the DIRECT POWER ON function activated,
the connection of the power supply make the projector turn on.
AC
Power
cord
2.
Push the Cord Stopper until it is caught by
the hook.
WARNINGŹ'RQRWFRQQHFWWKHSURMHFWRUWRDSRZHUVXSSO\ZKLOHQROHQV
unit is attached to it.
ŹPlease use extra caution when connecting the power cord, as incorrect or
IDXOW\FRQQHFWLRQVPD\UHVXOWLQ¿UHDQGRUHOHFWULFDOVKRFN
• Do not touch the power cord with a wet hand.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one. Never modify the power cord.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Do not distribute the power supply to multiple devices. Doing so may overload
WKHRXWOHWDQGFRQQHFWRUVORRVHQWKHFRQQHFWLRQRUUHVXOWLQ¿UHHOHFWULF
shock or other accidents.
• Connect the ground terminal for the AC inlet of this unit to the ground terminal
of the building using an appropriate power cord (bundled).
NOTICEŹ7KLVSURGXFWLVDOVRGHVLJQHGIRU,7SRZHUV\VWHPVZLWKDSKDVH
to-phase voltage of 220 to 240 V.
Power
Cord
+RRN
Cord
Stopper
Loading ...
Loading ...
Loading ...