Loading ...
Loading ...
Loading ...
Mounting the turntable
1
Mount the hole in the center of the turntable on the
center spindle.
2
Turn the turntable until the roller of the main unit is
visible from the square hole on the side with the ribbon
tape.
3
Pull out the ribbon tape, and hang the belt on the roller.
0
Remove the ribbon tape after hanging the belt.
.
Ribbon tape
Belt
Roller
Square hole
0
Take care not to twist the belt when hanging it.
0
Store the ribbon tape after use, as it is required when replacing the belt.
4
Mount the turntable sheet on the turntable.
0
Mount the sheet with the side featuring the DENON logo facing down.
Contents Preparations Connections
Playback and recording
Tips Appendix
11
Front panel Rear panel
Loading ...
Loading ...
Loading ...