Loading ...
Loading ...
Loading ...
17
Oven light is not working
The bulb has probably burnt out. You can buy a replacement
bulb (which is not covered under the warranty) from a good
electrical store. Depending on the type of bulb, ask for a 15 W
– 110V / 130V lamp (Fig. 6.1) or a 40 W – 110 V / 130V halogen
lamp (G9) (Fig. 6.2). Note: For bulb type 1, it MUST be a
special bulb, heat resistant to 300 °C.
Turn o the power at the circuit breaker.
Before removing the existing bulb, turn o the power supply
and make sure that the oven is cool. Open the oven door and
remove the oven shelves.
Unscrew the bulb cover by turning counter-clockwise. It may
be very sti (Fig. 6.3).
For bulb type 1
Taking care to protect your ngers with a glove in case the
bulb should shatter, unscrew the old bulb.
Screw in the new bulb; screw back the bulb cover. Turn on the
circuit breaker and check that the bulb now lights.
For bulb type 2
Pull the existing bulb to remove it. When handling the
replacement bulb, avoid touching the glass with your ngers,
as oils from your hands can cause premature failure. Push,
click in the replacement bulb.
Replace the bulb cover by turning it a quarter turn, clockwise.
Turn on the circuit breaker and check that the bulb now
lights.
The oven door is misaligned
The bottom hinge of either oven door can be adjusted to
alter the angle of the door (Fig. 6.4). Loosen the bottom
hinge xing screws and use the notch and a at bladed
screwdriver to move the position of the hinge to set the
hinge position (Fig. 6.5).
Retighten the hinge screws.
ArtNo.324-0005 Oven light bulb
Fig. 6.1
Fig. 6.2
Fig. 6.3
15 W – 110V / 130V
Bulb type 1
Bulb type 2
40W – 110V / 130V
ArtNo.320-0007 Oven door hinge adjustment 2
Eect of hinge adjustment – exaggerated for clarity
Oven door omitted for clarity
Centre line of hinge pin
Fig. 6.4
Fig. 6.5
Loading ...
Loading ...
Loading ...