Loading ...
Loading ...
Loading ...
3-13
ASUS USB Type-C Monitor MB166C
After connecting with the
USB Type-C source device,
the power LED lights
continuously blinking or
showing ASUS logo repeatly
• Insufficient power supply from source USB
Type-C devices. Please follow below steps:
• Press the left function key, and then connect
the USB Type-C cable. This operation will
enable built-in safe mode. After displaying
ASUS logo, please release the Blue Light
Filter button. After ASUS Logo disappearing,
there is “safe mode” message OSD showing
up. Once “safe mode” message OSD
disappears, please set background color to
white image or nearly white image (*1).
• Press MENU button, main menu OSD is
showing. The upper left corner of the OSD will
display small red-colored font “S”, indicating it
is now in safe mode. Enter brightness setup,
press the up key to tune up brightness. During
the process, please note down brightness
value “Y” up until MB166C re-start.(*2). For
example, if brightness value shows “70” and
MB166C restarts when adjusting to “71”,
“70” is the “Y” value to note down and is the
highest brightness value for the connecting
USB-C source device.
• Press MENU button, main menu OSD is
showing. The upper left corner still indicate
“S” as safe mode. Adjust the OSD brightness
value to “Y”
• Close the OSD and press Low Blue Low Filter
hot key for 5 seconds to turn off safe mode.
• Complete.
*1: White color background will consume higher power, so it’s better to use
white color background to test the power limit from source USB Type-C
device.
*2: If MB166C does not re-start when adjusting to value 100, that means
source USB Type-C device has sufcient power supply.
Loading ...