Loading ...
Loading ...
Loading ...
APPLIANCE ELECTRICAL CONNECTION
The electric connection
must comply with the current legal
standards
and
regulations.
Before making the connection, check that:
The system electrical rating and the current outlet are adequate for the maximum power output of the appliance (see the
label applied to the bottom of the casing).
The outlet or the system is equipped with an efficient ground connection in accordance with the current legal standards and
regulations. The manufacturer will not be responsible for the non-compliance with these instructions.
The power cord is supplied with a 15A plug, suitable for the load indicated on the label and a standard 15A GPO.
Letter L (phase) =brown
w
i
r
e
;
Letter N (neutral) = blue
w
i
r
e
;
Ground symbol =
green
-
yello
w
wi
r
e
;
Fig. 14
The power cord must be positioned so that a
temperature
of 75°C will not be reached at any point.
Do not use reductions, adapters or splitters since they might cause false contacts and lead to dangerous
overheating.
When the
connection
is made
directly
to the electric
netw
or
k
:
Use a device that ensures disconnection from the mains in which the contacts are opened to a distance that permits
complete disconnection according to the conditions for over-voltage category III.
The ground wire must not be interrupted by the circuit-breaker.
As an alternative, the electric connection can also be protected by a high-sensitivity residual current circuit- breaker
but this may be subject to nuisance tripping due to residual humidity in hea
t
ing elements.
It is highly recommended to attach the special green-yellow ground wire to an
effi
cient ground system.
WARNING:
If the power cord is replaced, the ground w ir e
(yellow-green)
connected to the terminal,
s
ho
ul
d
be
longer than the other wires by about 2
c
m.
WARNING:
if the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly
qualified person in order to avoid a hazard.
TABLE N°3: TYPES OF POWER CORDS
Work
s
ur
fa
c
e
o
p
e
r
at
i
on
O
v
en
o
p
e
r
a
t
i
on
Cross s
ecti
on
230V
~
230V 3~ 400V 2N~ 400V 3N~
Only gas burner Gas o
v
en / Electric
g
rill 3x1mm² - - -
V
entilated Electric O
v
en 3x1,5mm² - - -
The appliance
conforms
to the
regulation
AS/NZS5263
regarding
gas appliance for domestic use and
A
S/
N
ZS
60335.26
regarding
safety and CSPR 14
regarding electromagnetic
compatibility.
10
Loading ...
Loading ...
Loading ...