Loading ...
FULL ONE-YEAR WARRANTY ON CRAFTSMAN- ELECTRIC EDGER _:_
c=_ If this Craftsumn Electric Edger fails to perform properly due to a defect in inatefial or workmanship within one year
_<
_x from the date of purchase, Sears will repair it free of charge.
If this Craftsman Electric Edger is used for commerdal and rental purposes, this warranty covexag_ applie s for only
90 days from the ,dateof purchase, This warranty applies only while this product is in use in the United States.
WARRANTY SERVICE IS AVAILABLE BY CONWACTING THE NEAREST SEARS STORE OR SERVICE
_:_ CENTER THROUGHOUT THE LrNIT!3DSTATES.
<:_ This warranty gives you specific legal fights and you may also have other rights which vary from state to state.
=._ARS, ROEBUCK AND CO., DEPT. 698/731A, Sears Tower, Chicago, IL 60684
IMPORTANT: rules for safe operation
DOUBLE INSULATION
Double Insulationisa conceptinsafety,replacingthestandard
grounded supplysystem inelectricpower tcols.Theconstrue-
tion of a double insttlated tool affords comparable pret_etion to a
properly grounded tool without the necessity for usiug a ground-
ed conductor.The doubleinsulationsystemeliminatesthe need
fortheusualthree-wiregroundedpower cordand groundsupply
systenLWherever thereiselee_ccurrentinthe toolthereare
two complete se_s of insulation to protect the user. All exposed
metal parts are isolated from the internal metal motor eom_
ponents with proteetfng instthtion: The lead wires, switch, etc_
with their functional insulation liave the added prote_ion of non-
conductivesleevingor housingtocompletethedoubleinsulation.
system.
SERVICING OF A TOOL WITH-DOUBLE INSULATION lqF__
QUIRES EXTREME CARE AND. KNOWLEDGE OF.THE
SYSTEM AND SHOULD BE PERFORMED ONLY BY A
QUALIFIED SERVICE TECHNICIAN. FOR SERVICE WE
SUGGEST YOU RETURN THE TOOL TO YOUR NEAREST
SEARS STORE FOR REPAIR WHICH WILL BE DONE WITH
ORIGINAL FACTORY REPLACEMENT PARTS.
SAFETY RULES FOR POWER TOOLS
CAUTION
!. Keep hands,feet,and facedear ofrotatingblade.
2. Use SafetyGoggles.Wear ata_ timeswhen usingtoo!`
3. Dress properly.Always wear shoes.Do not operatetool
while barefootor when wearing sandals,canvasor open-
toed shoes.Use of rubber glovesand safetyfootwearis
recommended when working outdoors.Wear longpantsto
protectyour legs.
4. Keep childrenaway. Keep spectatorsat a safedistance.
5. WARNING: To preventelectricshockhazarduseonlywith
an extension cord suitable for outdoor use. A two-wire e_rd
withouta ground connectionmay be used sincethetoolis
double insulated. Cord should be !8 gauge or heavier to pre-
vent overheating and loss of power, U.L. listed extension
cords are available at your nearest Sears store.
6. Toprevent disconnection of power supply cord from the ez-
tension cord during operation see hstructions v_h Fig. 4.
7. _Avoid Dangerous Environment-- Do not use unit in damp or
8. Don't force this too!. It wi!l work begter and safer at the rate
R was designed.Ifmotor slowsdown toomuch,pullaway
and allowunitto bbta_nfullspee&
9. Do not use toolfor any job exceptthat _orwhich itis
intended.
10. Do not immerse tool in water or operate in rai_
1i. Don't overreach--Keep proper footing and balance at all
ti_es.
t2. Don't abuse cord--Never e_rr_tool by Cord o_ yank cord
from receptacle.Keep cordaway from heat,oiiand sharp
edges.Replacedamaged cordimmediately.
13. Nevercarry pluggedintoo!with fingeron switch,
14= Disconnecttoolfrom thepower.supplywhen notinuse and
when making any repairsor inspections.
I5. Maintain tool withcare. Keep air ventsclearof debris. Keep
guards in place arm in working orderand follow instructions
forreplacingblade.
16. _tore indoorsin a high,dry,lock-upplaceoutofreathof
children.
Page2
Loading ...
Loading ...
Loading ...