Loading ...
Loading ...
Loading ...
TO REMOVE BELT
1. Turn Power-
Mate ® upside
I down.
2. Unscrew the
two (2) Power-
Mate ® cover
screws.
3. Turn Power-
Mate ¢ right
side up,,Press
handle release
pedal and
lower the
swivel,. Lift rear
latches up.
4o To remove cover,
grasp the sides and
pull ouL
5. Depress tabs
on rear of
agitator cover
and rotate
forward to
release from the
Power-Mate ®
base.
6. Lift agitator
(_ assembly out
and remove
_, worn belto
End Cap
7oCheck and clean end cap areas, See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, the agitator must be cleaned every time
the belt is chan_,,
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Use Clean Agitator
HEAVY - every week
(used daily)
MODERATE - every month
(used 2-3 times/week)
LIGHT - every 2 months
(used I time/week)
i 0i
Disconnect cleaner from electrical outlet,
Check and remove hair, string and lint build-
up frequently in the Power-Mate ® agitator
and end cap areas,
Remove any dirt or debris in the belt path
area or in the brush roller area,,
Carefully remove any string or debris
located on the agitator, or end caps.
3 •
Belt
Pufley
Brush |
Unit _
End Cap
i6
Loading ...
Loading ...
Loading ...