Dreame L10 PRO User Manual

Loading ...

10 11

2. Add Device

This product works with the Mi Home/Xiaomi Home app. * Use the Mi Home/Xiaomi Home app to control your device and to interact with other

smart home devices.

Connecting with Mi Home/Xiaomi Home App

Open the Mi Home/Xiaomi Home app, and tap " " in the upper

right. Then tap " " in the top right corner, scan the QR code,

add "Dreame Bot L10 Pro", and follow the prompts to 󽗉nish the

connection.

• Only 2.4GHz Wi-Fi is supported.

• The version of the app might have been updated, please follow the

instructions based on the current app version.

Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and

add the device again.

1. Download the Mi Home/Xiaomi Home App 3. Reset Wi-Fi

Scan the QR code to download and install the app. You will be

directed to the connection setup page if the app has been installed

already. Alternatively, search “Mi Home/Xiaomi Home” in the app

store to download and install it.

Simultaneously press and hold the buttons and until you hear

a voice say, “Waiting for the network con󽗉guration.” Once the Wi-Fi

indicator is blinking slowly, the Wi-Fi has been successfully reset.

Wi-Fi Indicator

·Blinking slowly: To be connected

·Blinking quickly: Connecting

·On: Wi-Fi connected

Note:

1. Turn On/O󽗈 3. Cleaning Mode

2. Start Cleaning

How to Use

Press and hold the button for 3 seconds to turn on the robot. Once

the power indicator turns solid white, the robot is in standby mode.

To turn o󽗈 the robot, press and hold the button for 3 seconds when

the robot is not moving. Turning o󽗈 the robot will end the current

cleaning task.

Dreame Bot L10 Pro has four cleaning modes: Quiet, Standard,

Strong and Turbo. The default mode is Standard. You can specify the

cleaning mode in the Mi Home/Xiaomi Home app.

Press the button brie󽗊y to turn on the robot. Upon activation, the

robot will accurately map out a route, methodically clean

along the edges and walls, then 󽗉nish by cleaning each room in

an S-shaped pattern to ensure a thorough job.

4. Pausing/Sleep Mode

Pausing: Press any button to pause the robot during cleaning.

Sleep Mode: The robot will automatically enter Sleep Mode after 10

minutes of inactivity, then the power and charging indicators will go

o󽗈. To wake up the robot, press any button.

• The robot will turn o󽗈 automatically if left in Sleep Mode for more than 12

hours.

• When the robot is paused, placing it onto the charging dock will end the

• current cleaning task.

Note:

5. Do Not Disturb Mode

Do Not Disturb Mode prevents the robot from automatically starting

cleaning tasks, and the power indicator remains o󽗈. You can enable

Do Not Disturb Mode or modify its hours in the app. (The mode is on

by default from 22:00 to 08:00.)

• Scheduled cleaning tasks will still be carried out during the DND period.

• The robot will continue cleaning after the DND period ends.

Note:

• Before a cleaning task, make sure the robot is fully charged and starts

from the charging dock. Do not move the charging dock while the robot is

cleaning.

• If the battery is too low, the robot will automatically return to the dock

to charge. It will resume un󽗉nished cleaning tasks after charging to the

necessary battery level. (The breakpoint continuous cleaning function must

be enabled on the app in advance.)

Note:

Loading ...

Dreame L10 PRO Robot Vacuum

User Manual - Page 13