Napoleon LEX730RSBIPSS 76 Inch Stainless Steel Freestanding Grill

User Manual - Page 7

For LEX730RSBIPSS.

PDF File Manual, 60 pages, Read Online | Download pdf file

LEX730RSBIPSS photo
Loading ...
Loading ...
Loading ...
www.napoleongrills.com
7
EN












1. Open grill lid. 1. Open grill lid. 1. Open side burner cover.
2. Push and turn any main burner
knob slowly to the ’hi’ posion. This
acon will ignite the pilot ame
which will in turn light the selected
burner. If the pilot lights, connue to
push down on the control knob unl
the burner lights and then release.
2. Remove the warming rack. 2. Push and turn side burner
control to high posion.
3. If the pilot does not ignite, then
immediately turn the control knob
back to the ‘o posion and repeat
step 2 several mes.
3. Push and turn the rosserie
burner control knob slowly to the ‘hi’
posion. This acon will ignite the
pilot ame which will in turn light the
burner. If the pilot lights, connue
to push down on the burner control
knob unl the burner lights then
release.
3. Press and hold igniter buon
unl burner lights, or light by
match.
4. If the pilot and burner will not
ignite within 5 seconds, turn the
control knob to the ‘o’ posion and
wait 5 minutes for any excess gas to
dissipate. Either repeat steps 2 and 3
or light with a match.
4. If the burner does not ignite, then
immediately turn the control knob
back to the ‘o’ posion and repeat
step 3 several mes.
4. If the burner will not ignite
within 5 seconds, turn the control
knob to the ‘o’ posion and wait
5 minutes for any excess gas to
dissipate. Either repeat steps 2
and 3 or light with a match.
5. If lighng the unit with a match,
clip the match into the supplied
lighng rod. Hold the lit match down
through the grill and sear plate while
turning the corresponding burner
valve to high.
5. If the burner will not ignite within
5 seconds, turn the control knob to
the ‘o’ posion and wait 5 minutes
for any excess gas to dissipate. Either
repeat steps 3 and 4 or light with a
match.



Lights



Right Centre



Rear



Centre

Loading ...
Loading ...
Loading ...