Loading ...
Loading ...
Loading ...
nsta ato ,, ct o
Step 4
In_et Hoses
1 Install hoses with the straight end (with filters)
fitted to the faucets
2 hstall elbow ends onto washing machine (inlet
valves are marked on the back of the machine
H=hot, C- cold) Ensurethe hot is connected to the
hot, and the cold is connected to the cold
Hote:
If there is a cold water supply only, an inlet valve
cap (available from Fisher & Paykel)MU%Tbe
connected to the hot valve The cap prevents
water leaking from the hot valve However, we
recommend this product is connected to both hot
and cokt water
Step .5
Leveling the Washe_
'1 Unscrew the i%et so the machine is NOT sitting on
the corner cabinets, then fit the rubber leveling
inserts (reef to diagram 1)
2 Move the washer into its final position We suggest
a minimum clearance of 1"(2r_mm)on each side lot
easeof i/]stallation (%eediagram 2)
s Turn ors water and check hose connections for
leaks Check that there are no kinks in the hoses
4 It is IMPORV\N] to level the washer to ensure
proper performance during spin
Adjust the f{,et by imscrewingiscrewing to make
sure the washer is level and cannot rock
s Use the walls and adjacent counter tops asa sight
guide to check to see if washer appears level
Readjust the feet if necessary
6 Open the Ikt and check the washer tub to see that
it sits slightly lorward of centre (%eediagram _)
2
"( of
o S!
ii ii
Fh f7 h
:::j::::::: I',/t i
d:::j:::i:
/' (}'_) ' (}"_)
iII iii I T
D a_.:_ยข_t 2
D ag"aK 3
Loading ...
Loading ...
Loading ...