Loading ...
Loading ...
Loading ...
10
9. ALARMS SHOWN ON DISPLAY
ALARM CAUSE SOLUTION
Tank (A2) missing or incorrectly
positioned
Place the tank back in its correct position (see para-
graph “4.1 Draining into the tank”)
Tank full Empty the tank (see paragraph “4.1 Draining into the
tank”)
Room temperature too low (see op-
erating limits in chap. “8. Technical
Specications”)
Increase the ambient temperature if possible
Faulty probe Contact the Service Centre
10. TROUBLESHOOTING
Below is a list of possible malfunctions.
If the problem cannot be solved using the proposed solution, contact the Service Centre.
PROBLEM CAUSE SOLUTION
The appliance is operating in dehumid-
ifying mode, but the humidity does not
decrease
The lter is clogged Clean the dust lter (para. “7.2 Cleaning
the dust lter”)
Either the temperature or humidity in the
room is too low
In certain conditions the appliance will
not dehumidify: check the operating lim-
its of the appliance (see chapter “8. Tech-
nical Specications”). In certain cases, it
is recommended to heat the room need-
ing to be dehumidied.
The set relative humidity level is too high Set a lower humidity value (see para. “5.1
Dehumidifying mode”).
Loading ...
Loading ...
Loading ...