Loading ...
TEMPERATURA
PLANCHADO PERMANENTE DELICADO
CALOR MEDiO o ! CALOR BAJO
REGULAR f _ _ SOLO AiRE
CALORALTO e/ _ SIN CALOR
LJ
F.N_NOiDO
©
TIEMPO
DE SECADO
ENFRIAMIENTO
2{)
30 e
4O
59 t
60 q
7O
INiCIO
AUTOSECADO
PLANCHADO PERMANENTE
PARA DESARRUGAR
MAS SECO
MENOS SECO AUTOSECADO
ENFRIAMiENTO REGU LAR
Cycle Selection (cont.)
Drying time variesdepending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
Autosecado Planchado Permanente
(Automatic Perm Press) Cycle
Thiscycle isbestfor permanent press,knit and delicate
items. Drying time isdetermined automatically at the
temperature selection of your choice.
Calor Medio (Medium heat)is suggested for
permanent press items.
Calor Bale (Low heat) is suggested for knit and
delicate items.
If the dried load cannot be removed promptly, the cycle
selector will advance to the Para Desarrugar(Wrinkle
Rid)setting where unheated tumbling continues for 30
minutes to help reduce wrinkling.
The Cycle Signal will sound briefly every 5 minutes as
a reminder to remove the load.
Autosecado (Automatic) Regular Cycle
This cycle isbest for cotton items that can be tumble
dried.
Drying time is determined automatically at the
temperature selection of your choice. Thiscycle isbest
for items of similar fabric, weight and construction.
For items requiring more drying time, set cycle
selector on MAS SECO(More Dry).
For items requiring less drying time, set cycle
selector on MENOS SECO(LessDry).
Tiempo de Secado (Timed Dry) Cycle
This cycle provides up to 70 minutes of drying time at
the temperature selection of your choice.
Energy Saving Tips
Keep the lint screen clean and exhaust the dryer
correctly.
Sort laundry properly and selectproper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
Dry only full loads. Single items and small loads
usually take longer to dry.
Avoid overloading, adding wet itemsto a partially dry
load, and overdrying.
Dry one load after another to take advantage of a
warm dryer.
Opening the door needlessly causes warm air to
escape,which prolongs drying time.
If possible, use the dryer on low humidity days.
Installthe dryerinan areawhere the room temperatu re
is at least 45% (7°C).
P/N134844000 (0611)
Loading ...
Loading ...