OPERATINGINSTRUCTIONS
TEMPERATURA
PLANCHADO PERMANENTE DELICADO
CALOR MEDIO o • CALOR BAJO
REGULAR f _ X SOLO AIRE
CALORALTO e___e SiN CALOR
EN_ND_O
30
TiEIVIPO
DE SECADO
ENFRIAMIENTO INIClO
AUTOSECADO
PLANCHADO PERMANENTE
PARA DESARRUGAR
MAS SECO
6O
70 MENOS SECO AUTOSECADO
ENFRIAMIENTO REGU LAR
Before Operating Your Dryer
Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETYINSTRUCTIONSin your dryer owner's guide
before operating this appliance.
Operating Steps
Read Drying Procedures in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3, Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Temperatura (Temperature) controL
6. Turn cycle selector clockwise to desired
setting.
7, Start dryer, Pushthe Start button and hold for 1-
2 seconds,orturn the Turnto Startcontrol clockwise
to ON. Hold for 1-2 seconds and release.
8. A signal will sound when the cycle ends.
9. Remove items immediately and hang orfold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
_To avoid fire hazard, do not useheatto
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials.
Use$61oAire-Sin Calor (Air Fluff-No Heat)setting only.
TheREGULAR-CalorAIto (High Heat), PLANCHADO
PERMANENTE-Calor Mealie (Perm Press - Medium
Heat), and DELICADO-Calor Bajo (Delicates-Low
Heat) temperature settings may be usedwith any cycle
setting. The S61o Aire-Sin Calor (Air Fluff-No Heat)
setting can be used only in the Timed Dry cycle.
SoloAire-Sin Calor(AirFluff-No Heat) settingtumbles
the load without heat. Use$61oAire to freshen clothing,
pillows or blankets, or to dust draperies.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
for 5-10 minutes. This reduces wrinkling and makes
items easierto handle during unloading.
Printed in U.S.A. P/N134844000(0611)
Loading ...
Loading ...
Loading ...
