Loading ...
Loading ...
Loading ...
19
SERVICE AND ADJUSTMENTS
LAWN MOWER
REAR DEFLECTOR
The rear deflector, attached between the
rear wheels of your mower, is provided to
min i mize the possibility that objects will be
thrown out of the rear of the mower into
the operator’s mowing position. Replace
the deflector if it becomes dam aged.
DISCHARGE DEFLECTOR
(IF EQUIPPED)
The discharge deflector, attached to the
dis charge opening of your lawn mower, is
pro vided to prevent the possibility of injury
re sult ing from objects being thrown out of
the dis charge opening into the operator
mowing position. Replace the dis charge
deflector if it becomes dam aged.
TO ADJUST CUTTING HEIGHT
See “TO ADJUST CUTTING HEIGHT” in
the Operation sec tion of this manual.
TO ADJUST HANDLE
3 POSITION “EZ”
The handle on your lawn mower has three
(3) height positions - adjust to height that
suits you.
• Remove knob and carriage bolt on one
side of the lower handle.
• While holding handle assembly, remove
knob and car riage bolt from opposite
side, align hole in handle with desired
hole in handle bracket and reassemble
bolt and knob and tighten securely.
• Align opposite side of handle with same
positioning hole and secure with bolt
and knob.
Handle
bracket
Low
Knob
High
Medium
Bolt
CAUTION: Before performing any service or adjustments:
• Release operator presence control bar.
• Make sure the blade and all moving parts have com plete ly stopped.
• Disconnect spark plug wire from spark plug and place wire where it can not come in
contact with plug.
3 POSITION “QUICK”
The handle on your lawn mower has three
(3) height positions - adjust to height that
suits you.
• Squeeze the bottom ends of lower
handle towards each other until the pin
in handle can be inserted into one of the
three height adjustment holes.
High
Handle
bracket
Handle pin
Medium
Low
SQUEEZE
ENGINE
CARBURETOR
The carburetor has been preset at the
factory.
• The air filter must be assembled to the
car bu re tor when running engine.
See the ADJUSTMENT section of your
engine manual for further instructions.
ENGINE SPEED
The engine speed has been factory set.
THROTTLE CONTROL
If it becomes necessary to adjust or re-
place the throttle control, see the ADJUST-
MENT section of your engine man ual.
Loading ...
Loading ...
Loading ...