Loading ...
Loading ...
Loading ...
12
“COMBI-CUT” MOWERS
Your lawn mower was shipped ready to be
used as a mulcher. To convert to bagging
or discharging:
REAR BAGGING
• Open rear door and remove mulcher plate.
Store mulcher plate in a safe place.
• You can now install grass catcher.
• To convert to mulching or discharging
operation, install mulcher plug into rear
discharge opening of mower, mak ing
sure all tabs are seated properly.
Slots
Mulcher
plate tabs
MULCHER PLUG TYPE “B”
To convert to bagging or dis charg ing:
• Lift discharge deflector and remove
mulcher plug.
• Mower can now be used for side dis-
charg ing or op tion al grass catcher can
be attached.
• To return to mulching operation, simply
reinstall mulcher plug as shown, making
sure tab is seated properly.
MOWER IS NOW
READY FOR MULCHING
OPERATION
SIDE DISCHARGING
• Mulcher plate must be installed into rear
discharge open ing of mower (see above
instructions).
• Open mulcher door and install dis-
charge deflector under door as shown.
• Mower is now ready for discharging
operation.
• To convert to mulching or bagging
operation, dis charge deflector must be
removed and mulcher door must be
closed.
MULCHER PLUG TYPE “A”
To convert to mulching operation, mulcher
plug must be installed into discharge
open ing of mower.
• Open discharge deflector.
• Insert tab of mulch plug into housing
opening.
• Align hooks of mulch plug over hinge
rod of discharge deflector. Push mulch
plug down until mulch plug is seat ed in
housing opening.
CAUTION: Do not run your lawn mow-
er without discharge deflector, ap proved
grass catcher or mulcher plug in place.
Hooks
Housing
opening
Mulcher plug
Hinge rod
Tab
Discharge
deflector
Lift
discharge
deflector
Install
mulcher plug
Tab
OPERATION
CAUTION: Do not run your lawn mow-
er without discharge deflector, approved
grass catch er or
mulcher plug in place.
Loading ...
Loading ...
Loading ...