Loading ...
Loading ...
Loading ...
Operating Your Dehumidifier
TANK FULL INDICATOR
When the water tank is full, the dehumidifier will automatically stop operating
and the full water tank indicator will illuminate. Remove the water tank carefully
with both hands and discard the water. Replace the water tank in the correct
position. The dehumidifier will automatically begin operating again.
Note: If the water tank is not installed correctly, the unit will not operate.
Always ensure that water tank is installed correctly.
REMOVING AND EMPTYING THE WATER TANK
1. To remove the water tank, gently pull the water tank out of the back of the
dehumidifier.
2. Use the handle on top of the tank to help you to empty the tank.
3. Once empty, slot the tank back into the back of the dehumidifier.
CONTINUOUS DRAINAGE
If you would like to use the dehumidifier over a long period of time whilst away
from the home, you can use the continuous drainage feature.
1. Connect the drainage hose (supplied) into the drainage point of the
dehumidifier.
2. Feed other end of the drainage hose into a suitable drainage point.
Note: When using the continuous drainage feature, the hose must be placed
below the drainage outlet without knots or kinks.
Note: When the continuous drain feature is not being used, remove the drain
hose from the drainage point, and ensure water tank is installed correctly.
Loading ...
Loading ...
Loading ...