Loading ...
Loading ...
2
SPECIAL CORD SET
INSTRUCTIONS
A short power-supply cord is provided to
reduce the risks resulting from becoming
entangled in or tripping over a longer cord.
Longer extension cords are available and
may be used if care is exercised in their use.
If a long extension cord is used, the marked
electrical rating of the extension cord must
be at least as great as the electrical rating
of the appliance, and the longer cord should
be arranged so that it will not drape over the
countertop or tabletop where it can be pulled
on by children or tripped over.
NOTICE
This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug will  t in
a polarized outlet only one way. If the plug
does not  t fully in the outlet, reverse the
plug. If it still does not  t, contact a quali ed
electrician.
Do not modify the plug in any way.
OPERATING NOTICE
Clogging and backing up of water and/or
coffee in the  lter basket can occur under
any or a combination of any of the following
conditions: The use of too  nely ground
coffee, using two or more paper  lters, using
the gold tone  lter in conjunction with a
paper  lter or not properly cleaning coffee
grounds from the gold tone  lter, or allowing
coffee grounds to spill over the  lter.
Caution: Never open the top cover during
the brewing cycle, even if no water is draining
from the  lter basket, since extremely hot
water/coffee can spill out from the  lter
basket and cause injury. If water/coffee is
not draining from the  lter basket during the
brewing cycle, unplug the unit and wait 10
minutes before opening the top cover and
checking the  lter basket.
IMPORTANT UNPACKING
INSTRUCTIONS
1. Place the box on a large, sturdy,  at
surface.
2. Remove the instruction book and any
other literature.
3. Turn the box so that the back side of
the coffeemaker is down and slide the
coffeemaker from the box.
4. After the coffeemaker has been removed,
place the box out of the way and lift off the
two pulp inserts.
5. Remove the cardboard insert between the
carafe lid and Brew Pause
mechanism by
sliding it out of the unit.
6. Grasp the carafe by its handle, remove
it from the heater plate and remove the
polybag.
7. Lift the coffeemaker off the remaining two
inserts and remove the polybag covering
the coffeemaker.
We suggest you save all packing materials in
the event that future shipping of the machine
is needed. Keep all plastic bags away from
children.
Loading ...
Loading ...
Loading ...