Loading ...
Loading ...
Loading ...
14
English
How to Use
2-in-1 filter replacement reminder
• If the filter replacement reminder blinks during operation of the air
purifier, replace the 2-in-1 filter, and then press and hold the Sleep
button for more than 3 seconds to turn off the reminder.
• The reminder should also be turned off by pressing and holding the
Sleep button for more than 3 seconds when you have replaced the
filter for any reason before the replacement reminder lights up.
NOTE
• PM concentrations can be affected by the environmental conditions
in which the device is used (e.g., there is a construction site or road
nearby, the device is used near a fabric sofa, a vacuum cleaner is used
or bedding/clothes are arranged around the device).
• The PM concentration readings may increase if:
– The device is used in a carpeted room, a veterinary clinic or
clothing store where there is a lot of fur, a highly humid location or
a location with lots of smoke or insects,
– A humidifier, electric pressure cooker or spray is used around the
device, or
– Yellow dust occurs and the device is used in an environment
where there is inflow of outdoor air (due to the HVAC or ventilation
system or draughty window frames)
• If different types of air purifiers are used in the same room, the PM
concentration readings may not match as air circulates. The PM
concentration readings may vary depending on the product and PM meter.
• The PM concentration readings may not match official forecasts.
• In an environment that is affected by electromagnetic wave or
electrical noise, the PM concentration readings may increase
temporarily.
Using the functions
2022-03-18 오전 8:24:342022-03-18 오전 8:24:34
Loading ...
Loading ...
Loading ...