Loading ...
Loading ...
Loading ...
COMMERCIAL DEHUMIDIFIER
B-AIR.COM | 877.800.BAIR | WATER DAMAGE RESTORATION DIVISION
VANTAGE LGR 2200
DO NOT OBSTRUCT THE AIR INLET OR OUTLET.
Setting Up InstructionsProduct Identification
Place dehumidifier in the upright position. When transporting a dehumidifier to site, allow
the dehumidifier to stand for 30 minutes before switching ON. This is necessary to allow
the refrigerant system to stabilize and avoid system damage.
Setting Up the Dehumidifier
Operate the dehumidifier in an enclosed area, as this creates a drying chamber. Close all
doors, windows or areas that open to external areas, to maximize the dehumidifier’s
water removal efficiency. Keep traffic through the drying chamber to minimum. Place the
dehumidifier in the center of the room away from walls and furnishings. DO NOT allow the
airflows to be obstructed.
Drainage
The dehumidifier pump connects to a plastic drainage hose. The hose is stored on the
back of the appliance. Uncoil the entire hose ensuring there are no kinks or restrictions
and place the unattached end to a water vessel or run to outdoors.
Ensure that water which runs to outdoors does NOT create a slip hazard.
Water vessels MUST be checked regularly where used.
Filter
Bolts for fixing the handle
Air inlet panel
Back panel
Front panel
Handle cover
Water pipe supporter
Wheels
Handle
Control panel
Power cord
Water outlet
NOTE: Please install the handle by yourself (six bolts are for your installation).
Air outlet hood
≥
≥
≥
≥
20in
12in
32in
12in
IMPORTANT
4 5
C
M
Y
CM
MY
CY
CMY
K
LGR_2200_MANUAL.pdf 3 8/24/16 12:56 PM
Loading ...
Loading ...
Loading ...