Loading ...
Loading ...
Loading ...
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and
repeat for remaining casters. Make sure the two locking casters are secured at the rear and the non-locking
casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and save for future
maintenance.
Non-lock caster
Lockingcaster
Bottom shelf !
Bent U pin
Qty.1
Bent U pin
Attach side panels to bottom shelf using
three 1/4-20xl/2" screws, 7mm lock
washers, and 7mm flat washers per panel.
IMPORTANT: Panelwith large hole must
be on left side of bottom shelf.
Leftsidepanel
(with large hole)
Makesuresidepanels
arepushedas far to the
rear of bottom shelfas
possiblebeforefully
tightening screws.
1/4-20×1/2"screw
Qty.6
7ram lock washer
Qty.6
7ram flat washer
Qty.6
1/4-20×1/2"screw
7ram lock washer
7ram flat washer
Right side panel
M _ts 13
Loading ...
Loading ...
Loading ...