OWNER'SMANUAL
m
Auto },,,<_g _
@_ MENU[]]] --_ Illl!:%roadcasting--_ Auto IlllS_ogram--_ ENTER@3_
Scans for channels automatically and stores them in the TV's memory.
To start Auto Program, follow these steps:
[]
2.
3.
Select Auto Illl_rogram,and then press ENTERE3_.
Press the ENTERE3_ button to select Sta£.
Select II1[_o, Air, or Cable by highlighting and then pressing ENTERIZ3_.
Memorizing channels
Your TV memorizes channels and adds the memorized channels to the Channe_
Illl..............istwith the Auto Program function. Before your TV can memorize channels,
you must specify the signal source, either Air or Cable. If you select cable, when
you start Auto , you must also specify the cable system type, ,
HIIIRC,or IIIIIIIIRC.If you don't know your cable system type, contact your local cable
company for the information. Most cable companies use STIID.
@ If you have connected your TV to a cable or satellite set top box, you do not
need to run the Auto IIIProgramfunction,
1
1
6.
7.
If you selected Cable, you must specify your cable systems, First, select
IIDigi Cable System, and then press ENTERIZ3_,
Select STID, HIRO, or IIIIrllllF_O,and then press ENTERE3_,
Repeat for Analog Cable System,
Select Scan, and then press ENTERIZ3_,Auto IIIP_ogramstarts,
After all the available channels are stored, Auto IIIP_ogramremoves scrambled
channels, When done, the Auto IIIP_ogrammenu then reappears, This
process can take up to 30 minutes,
How to Stop Auto Programming
[]
2.
Press the ENTERE3_ button to select Stop.
A message will ask Stop Auto IIIP_ogram?Select Yes by pressing the 4 or I_
button.
1
Press the ENTERE3_ button.
[_ If you select Change Se rigs, the antenna setting screen appears. You
can re-set the antenna settings and start channel search again.
[_ Select Scan Again, and then press the ENTERE3_ button to restart
channel search.
m
Antenna
_} MENU_ -_ IIBroadcasting -_ Antenna -_ ENTERC}_
To change the source of your TV signal, follow these steps:
[]
2.
@
Select Antenna, and then press ENTERIZ3_.
Select the source of your TV signal, Air or Cable.
Selecting Air or Cab_e also changes the actual signal input from Air to Cab_e
or Cab_e to Air.
O
Using the Channel menu
m
@9 MENU _ IBroadca ng --_ Ohanne_ List --_ ENTERE3_
The Channe_ IIIL......istcontains the channels your TV displays (Added channels) when
you press the channel button on your remote. On the Channe_ IIIL......istscreen, you
can also view channel information, Added Oh°, and IIIIloavodtes1o5. Press the
I_(Mode) button to change the channel mode.
[_ When you press the OH LiST button, the Channe_ Mst screen is displayed
immediately.
Channel Mode
®
®
®
Switch between Air and Cable.
III it IIIIl=avodtes'Set channels you watch frequently as favorites. Add or
delete a selected channel in IIIIl=avodtes1o5.
% For detailed information about using III it IIIIl=avodtes,refer to "111it
IIIIl=avodtes".
IIIIl=avodtes1°5: Show all favorite channels, arranged in up to five groups.
Each group has a separate screen.
[_ The TV displays IIIW-_avodtes1°5 only if you have added favorites using
lied it IIII1=avo dtes.
® Added Ch°' Show all added channels.
m
[_ MENU[]_ _ IIBroadoa ng _ Schedule Manager _ ENTERE3_
You can schedule the TV to display a channel automatically at a selected time. In
addition, you can view, modify, or delete the scheduled viewing information.
i_ You must set the current time first using the Time _ C_ock function in the
System menu to use this function.
[]
[]
Select Schedule on the Schedule Manager screen, and then press the
ENTERIZ3_ button. The Schedule Viewing menu appears.
Press the 4/_/A/v buttons to set each menu option.
® Select the desired broadcasting signal.
® Channel: Select the desired channel,
® Repeat: Select Once° Manual0 8at_Sun0 Mon_lllbd or Everyday, if you
select Manual, you can set the day you want,
_} A check (,_) mark indicates a day you selected,
® Date: You can set a desired date,
_} Date is available only when you select Once in Repeat,
® 8ta£ Time: You can set the start time you want,
if you want to edit or cancel a scheduled viewing, select the scheduled
viewing on Schedule Then, press the ENTERE3_ button and
select IIEdit or IIDe_ete,
II
Edit
i_ MENU[]I] _ IIIl!:_roadoasting_ Illit Channe_ _ ENTER{3_
You can add, edit, or delete channels from the Channe_ Mst.
Deleting a channel from the Channel
1 Go to Illit Channe_ screen.
1
Press the A/v buttons to select a channel, and then press the ENTEREZ]_
button. The (,,/) mark indicates the channel you've selected.
i_ You can select more than one channel.
i_ Press ENTERE3_ button again to deselect the channel.
1
Press the (De_ete) button. The selected channel is deleted from the
Channe_ Mst.
Adding a channel to the Channe_
[]
1
On the IIEditChannel screen, press the TOOLS button, and then select
Catego_.
Select A_ and press the OIIKbutton. The A_ Channel List appears.
[_ Your TV wiii display all channels, including channels you deleted from the
IIIL..........ist,in the A_ Channel List.
[_ A gray-colored channel indicates the channel has been deleted from the
IIIL..........ist.
3. Select a deleted channel, and then press the _ (Add) button.
Using the colored and function buttons with III it Channel.
® S Green (De_ete/Add)
- Illl}e_ete:Deletes a channel from the channel list.
- Add' Adds a deleted channel. It only appears when you select a deleted
channel in A_.
® Blue (Select A_ /Illl}ese_eot A_): Selects or deselects all channels at
once.
® (Go To): Goes directly to a channel when you press the channel's
numbers. For example, to go to Channel 12 press 1 then 2.
/X
® v (Page)' Moves to the next or previous page.
®
(Too_s): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
- Antenna: Selects the broadcasting signal, air or cable.
- Category: Changes the channel mode. Select A_, Added Cho,
IIIReoe y Viewed, or Mo y Viewed. The channel mode you select is
displayed.
- IIEditIIIFavontes:Go to the IIEditIIIIl_avoes screen directly.
Rename Ohanne_ (analog channels only): Lets you assign a name of
up to five characters to a channel. For example, Food, Golf, etc. This
makes it easier to find and select the channel.
- IIIIIormation: Displays details of the selected program.
m
Edit IFavo es
[_ MENUI]]] _ IIIBroadoasting --_ III it IIIIloavodtes--_ ENTERE3_
You can add, edit, or delete favorite channels to or from one or more of 5 favorite
lists.
Adding a channel to IIIII-avodtes1-5
1. Go to the III it IIIIl-avodtesscreen.
m
Press the A/v buttons to select a channel, and then press the ENTEREZ}#
button.
1
Choose a specific favorite list among IIIIF=avodtes1_5 using the
IIIIloav,)button, and then press the (Add) button. The selected channel is
added to the favorites list you have chosen in IIIIloavodtes1o5.
[_ A channel can be added to more than one of the five favorite lists in
IIIIloavodtes1o5°
Deleting a channel from the IIIFsvodtes 1-5
[]
On the III it IIFsvodtes screen, select a favorite list using S (Change IIFSVo)
button.
[]
3.
Move to the favorite list, and then select the channel you want to delete.
Press the
1o5.
%
(IDe_ete)button. The selected channel is deleted from IIIIl=avoes
If you want to change the favorite channel order, press the _!
order) button, and then change the order using the A/v buttons.
Using the colored and function buttons with
® lyl Red (Category /Change order)
- Categopj' Changes the channel mode to Added Cho,
Viewed, or Mo y Viewed, and then displays the selected channel
mode.
- Change order: Changes the favorite channel order.
- IZZ}_(Done)' Completes changing the channel order.
® S Green (Change IIFaVo)'Changes the displayed favorite list.
® Yellow (Select A_ /IDese_eot A_)' Selects or deselects all channels at
once,
® Blue (Add /IIIDe_ete)
- Add' Adds selected channels to IFavontes 1-5.
- IIIDe_ete:Deletes a favorite channel from IIIFavontes 1o5.
®
®
®
(Go To): Goes directly to a channel when you press the channel's
numbers. For example, to go to Channel 12 press 1 then 2.
/X
v (Page)' Moves to the next or previous page,
(Too_s)' Displays the option menu, The option menu items that appear
may differ depending on the channel status and type,
- Copy to IIIIl=avodtes'Edits the selected favorite channel in
1°5. You can add to or delete from favorite lists,
- Rename IIIIl=avodtes'Lets you assign names to favorite channels,
- Antenna' Selects the broadcasting signal, air or cable,
- Illl it Channel' Go to the Illl it Channe_ screen directly,
- IIIIInformation' Displays details of a selected program,
Ci
ockin
Programs
m
},,,,,<,_g Rating Lock
_} MENUI_ --+ Illl!:_roadoasting--_ IIIIl:_ogram
IIIL,,,,,,,,,,,ock_ ENTERIB_
Prevent unauthorized users, such as children, from watching unsuitable programs,
Access blocked programs when you enter the default or a user defined 4-digit
PiN code,
®
The PIN input screen appears before the setup screen appears,
Enter a 4-digit PiN, The default PiN is 0-0-0-0, Change the PiN using the
lipIII1[H optio n.
IIIRatingIIILook: When On, lets you block TV programs based on their
ratings,
TV IIIRating: Lets you block TV programs based on their ratings, This function
allows you to control which TV programs your children can watch, _ IIIR ng
displays a grid with locks, The following categories are on the left side:
TVoy: Young children / _oy7: Children 7 and over / _oG: General
audience / TVolIPG:Parental guidance / TVo14: Viewers 14 and over / _o
Mature audience
The following categories are on top:
- AIILIIll............../ IIIbV=Fantasy violence / V: Violence / S: Sexual situation / IIIL...........sAdult
Language /ID: Sexually Suggestive Dialog
To block certain content, you select a lock, and press ENTERIZ3_(That
is, you "click it".). For example, click the lock at the intersection of V and
_oMA, and you block all programs that are rated violent and for mature
adults. The locks are also assigned to related groups. For example, if you
click _oY under AIILIIIL,then _oy7 will also automatically be blocked.
Similarly, if you click TVoG under AIILIIL, then all the categories in the young
adult group will be blocked (TVoG0 TVolIIPG0 TVo14 and TVoMA). The sub-
ratings (ID0 IIIL..........0S0 V) work similarly. So, if you block the Illl..............sub-rating in TVo
IIIPG, then the Illl..............sub-ratings in TVo14 and TVoMA will automatically be
blocked.
%
%
To unblock a category, click the lock. To unblock all the categories in
a row, click the lock under AIILIIll...............
To watch a blocked program, you must enter the Security code when
requested.
IIIRati (MIIIP_): You can block movies based on their MPAA rating,
The Motion Picture Association of America (MPAA) has implemented a rating
system that provides parents or guardians with advanced information on
which films are appropriate for children,
IIIRati (MIIIP_) displays a column with locks and the following ratings
categories:
G: General audience (no restrictions),/IIIPG: Parental guidance suggested,
/IIPGol 3: Parents strongly cautioned,/IIIR: Restricted, Children under 17
should be accompanied by an adult,/NCo17: No children under age 17./
X: Adults only,/NIIIIF_:Not rated,
To block certain content, you select a lock, and press ENTERIB_ (That
is, you "click it".). For example, click the X lock and you block all X-rated
movies. The rating categories are also grouped so that clicking one
category blocks all the categories a parent would block along with it.
For example, if you block the Illl_Gol 3 category, then IIIR0HCol 7 and X will
automatically be blocked also.
[_ To unblock a category, click the lock.
Canadian IIIEng_ishIIIRating:You can block TV programs based on their
Canadian English rating.
Canadian IIIEng_ishIIIRatingdisplays a column with locks and the following
ratings categories:
Programming intended for children under age 8./C8÷: Programming
generally considered acceptable for children 8 years and over to watch
on their own./G: General programming, suitable for all audiences,/IIPG:
Parental Guidance,/14÷: Programming contains themes or content
which may not be suitable for viewers under the age of 14. / 18÷: Adult
programming,
To block certain content, you select a lock, and press ENTERE3_ (That
is, you "click it".). For example, click the 18+ lock and you block all TV
programs rated 18+. The rating categories are also grouped so that
clicking one category blocks all the categories a parent would block along
with it. For example, if you block the G category, then Illl_G014+ and 18+
will automatically be blocked.
[_ To unblock a category, click the lock.
Canadian IIII1-_oh IIIRating: You can block TV programs based on their French
Canadian rating.
Canadian IIIIl-_enohIIIRatingdisplays a column with locks and the following
ratings categories:
G: General/8 arts+: Programming generally considered acceptable for
children 8 years and over to watch on their own, / 13 arts+: Programming
may not be suitable for children under the age of 13, / 16 arts+:
Programming is not suitable for children under the age of 16, / 18 arts+:
Programming restricted to adults,
To block certain content, you select a lock, and press ENTEREE_ (That is,
you "click it".). For example, click the 18 s+ lock and you block all TV
programs rated 18 s+. The rating categories are also grouped so that
clicking one category blocks all the categories a parent would block along
with it. For example, if you block the 8 s+ category, then 13 s+, 16
s+ and 18 s+ will automatically be blocked also.
[_ To unblock a category, click the lock.
IIIDown_oadab_e UoSo IIIRating: Parental restriction information you can use
while watching DTV channels.
[_ NOTE
® If information is not downloaded from the broadcasting station, the
IIIDown_oadab_e UoSoIIIRatingmenu is deactivated.
® Parental restriction information is automatically downloaded while you
watch DTV channels. It may take several seconds.
® The IIIDown_oadab_e UoSo IIIRati menu is available for use after
information is downloaded from the broadcasting station. However,
depending on the information from the broadcasting station, it may
not be available for use.
® Parental restriction levels differ depending on the broadcasting
station. The default menu name and IIIDown_oadab_e UoSo IIIR ng
change, depending on the downloaded information.
® Even if you set the on-screen display to another language, the
IIIDown_oadab_e UoSo Rating menu will appear in English only.
® Blocking one rating level will automatically block other categories that
deal with more sensitive material.
®
The rating titles (For example: Humor Level, etc,) and TV ratings (For
example: DH, MH, H, etc,) may differ depending on the broadcasting
station,
Cl
Other Features
m
®
_Settings
MENUE_ --_ IIBroadcasting --_ ©hanne_ Settings --_
ENTERIB_
• Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, This is done
automatically during the search and store operation, If the signal is weak or
distorted, fine tune the channel manually,
@
%
Fine tuned channels that have been saved have an asterisk ( * ) on the
right-hand side of the channel number in the channel banner,
To reset the fine-tuning, select Reset,
® C_ear Scrambled Channe_
This function filters out scrambled channels after Auto IIIProgram is completed,
This process may take 20-30 minutes,
How to Stop the Clear Scrambled Channels Function
[]
2.
3.
%
Press the ENTERE3_ button to select Stop.
Press the 4 button to select Yes.
Press the ENTERE3_ button.
This function is only available in Cable mode.
II
®
®
Options
MENUrm _ IB_oadcasting
--+ Audio
Options -+
ENTERE3_
Preferred Language
(digital channels only)
Use the A/v buttons to select a language, and then press ENTERE3_.
DigitaI-TV broadcasts can simultaneously transmit many audio tracks (for
example, simultaneous translations of the program into other languages).
i_ You can only select a language from among the ones being broadcast.
®
®
Mu_tioTrack Sound
Select an option using the A/v buttons, and then press ENTERE3_.
Mono: Choose for channels that are broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAIIP:Choose to listen to the Separate Audio Program, which is usually a
foreign-language translation.
[_ Depending on the program being broadcast, you can listen to Mono,
, or SAIIIP.
[_ When the TV is tuned to a digital channel and you press the TOOLS
button, you can select a language from among the ones being broadcast.
Visua_ IIIIImpaired
(digital channels only)
Adds a verbal description to the main audio to help the visually impaired.
m
Caption
(On-Screen Text Messages)
[_ MENUml _ IIIBroadoasting --_ Caption --_ ENTERE3_
®
®
Caption: You can turn the caption function on or off, If captions are not
available, they will not be displayed on the screen,
[_ The Caption feature does not work with devices connected to the TV
through the Component or HDMI input jacks,
Caption Mode: You can select the desired caption mode,
[_ The availability of captions depends on the program being broadcasted,
IIDefau_t/OO1 _004 /Text1 _Text4: (analog channels only) The Analog
Caption function operates in either analog TV channel mode or when a signal
is supplied from an external device to the TV, (Depending on the broadcasting
signal, the Analog Caption function may or may not work with digital
channels,)
®
IIIDefau_t/Service1 _Service6 / CC1 _CC4 /Text1 _Text4: (digital channels
only) The Digital Captions function works with digital channels.
[_ Se_icel _6 may not be available in digital caption mode depending on
the broadcast.
IIIDigita_Caption Options: (digital channels only)
Size: Options include Default, Small, Standard, and Large.
IIIbontStyle: Options include Default and Styles 0 to 7.
IIIbontOo_or: You can change the color of the letters. Options include Default
White, Black, Red, Green, Blue, Yellow, Magenta, and Cyan.
IIIBackground Co,or: You can change the background color of the caption.
Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta,
and Cyan.
IIIbo Opacity: This adjusts the opacity of text,
Transparent, Translucent, Solid, and Flashing,
Options include Default
IIIB kground Opacity: This adjusts the opacity of the caption background,
Options include Default, Transparent, Translucent, Solid, and Flashing,
IIRetum to IIIDef _t:This option sets Size, Font Style, Foreground Color,
Background Color, Foreground Opacity, and Background Opacity to their
defaults,
NOTE
• IIIDigita_Caption Options are available only when you can select
IIIDefau_tand Se_icel _ Service6 in Caption Mode,
® The availability of captions depends on the program being broadcast,
® The IDefau_t setting follows the standards set by the broadcaster,
® You cannot set the Foreground and Background to the same color.
® You cannot set both the IIIbontOpacity and the IIIBackground Opacity
to Transparent,
C3
Changing the Preset Picture Mode
m
Pictu
[_ MENUI]]] _ IIIPioture--> IIIP[otureMode
ENTERC_
Picture modes apply preset adjustments to the picture. Select a mode using the
A/v buttons, and then press ENTERE3_.
[_ When the TV is connected to a PC, you can only select IIIEnte_ainand
Standard.
® IIDynamio: Suitable for a bright room.
® Standard: Suitable for a normal room environment.
® Movie: Suitable for watching movies in a dark room.
® IIIEnte_ain: Suitable for watching movies and games.
[_ IIIEntertainis only available when the TV is connected to a PC.
C3
Adjusting Picture Settings
m
Ce_ IL,,,,,_ight Bdghtness
Sharpness Co,or / Tint {G/
@9 MENUI]]] --_ IIIPioture_ Oe_ IIIL......ig_ ENTERE3_
Your television has several options for adjusting picture quality.
using the A/'v/4/_ buttons, and then press ENTERC3_.
Select an option
NOTE
® When you make changes to Ce_ IIIL......ig, Contrast, IIIBdg hess,
, Co,or or Tint (G/Ill%,the OSD will be adjusted accordingly.
® When the TV is connected to a PC, you can only make changes to Ce_
, IIIBdg hess, and Sharpness.
® You can adjust and store settings for each external device connected to
the TV.
® Lowering picture brightness reduces power consumption.
m F, ictu Size
j_ MENUrm _ Illl_ioture-->Illl_iotu_eSize--> ENTERE3_
Illl_iotureSize provides various picture size and aspect ratio options. Select an
option using the A/v/4/_ buttons, and then press ENTERE3_.
®
Illl_iotureSize: If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well. However, we highly recommend you use your TV's
16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide screen mode.
Zoom1: Magnifies the picture moderately. Cuts off the top and sides.
Magnifies the picture more than Zoom1.
Wide IIIII-it:Enlarges the aspect ratio of the picture so it fits the entire screen.
4:3: Sets the picture to 4:3 mode, For analog TV programs,
[_ Do not set your TV to 4:3 format for a long time, The borders displayed
on the left and right, or top and bottom of the screen may cause image
retention (screen burn) which is not covered by the warranty,
Illoit: When your TV inputs HDMI (720p / 1080i/1080p) or Component
(1080i/1 080p) signals, displays the full image without any cut-off,
®
IIIPosition: Adjusts the picture position, is only available if IIIPioture
Size is set to Zoom l_ Zoom2° Wide IIIbit,or Screen
j_ To use the IIPosition function after selecting Zoom10 Zoom2, or Wide IIIFit,
follow these steps:
1. Select IIPosition, and then press the ENTERE3_ button.
2. Select the IIPosition button, and then press ENTERE3_.
3. Press the A/v buttons to move the picture up or down.
4. Press the ENTERE3_ button.
(_ If you want to reset the picture to its original position, select IIIResetin the
IIPosition screen, and then press ENTERE3_. The picture will be reset to
its default position.
%
To use the IIIIF_ositionfunction after selecting Screen IFit when connected
to an HDMI (1080i/1080p) or Component (1080i/1080p) source, follow
these steps:
1. Select IIIIF_osition,and then press the ENTERIZ3_button.
2. Select the IIIIF_ositionbutton, and then press ENTERIZ3_.
3. Press the A/v/4/i_ buttons to move the picture.
4. Press the ENTERE3_ button.
If you want to reset the picture to its original position, select IIIResetin the
IIIIF>ositionscreen, and then press ENTERC3_. The picture will be reset to
its default position.
%
%
The picture size can vary depending on the input resolution when you
play content using Videos in Media Illl_ay,
HD (High Definition) is: 16:9 - 1080i/1080p (1920xl 080) or 720p
(1280x720)
You can adjust and store settings for each external device you have
connected to an input on the TV,
Picture Sizes available by Input Source are listed below:
DTV (1080i, 1080p) 16:9_ Wide Fit_ 4:3_ Screen Fit
DTV (720p) 16:9_ Wide Fit_ 4:3
DTV (480i, 480p) 16:9_ Zoom l_ Zoom2_ 4:3
ATV, AV
Component (1080i, 1080p)
16:9_ Zoom l_ Zoom2_ 4:3
16:9_ Wide Fit_ 4:3_ Screen Fit
Component (720p) 16:9_ Wide Fit_ 4:3
Component (480i, 480p) 16:9_ Zoom l_ Zoom2_ 4:3
HDMi (720p, 1080i, 1080p) 16:9_ Wide Fit_ 4:3_ Screen Fit
)llllllllll_:[_) p
_} MENU[]_ _ llll_ioture--_ lllll:_lllllllll_ --_ ENTERE3_
You can watch a program whose signal has passed through the TV's tuner (that
is, from the Cable In or Antenna In jack) and watch one external video source
simultaneously. For example, if you have a cable box connected to the Cable In
jack, you can use IIIIF_lllllllll_ to watch programs from the cable box and watch a movie
from a Blu-ray player attached to the HDMI In jack.
i_ NOTE
O
®
For PIP sound, refer to the Sou Se)ect instructions.
If you turn the TV off while watching in the PiP mode, the PiP function
is reset to off. When you turn your TV on, you must turn PiP on again to
watch in the PiP mode.
® You may notice that the picture in the PiP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
® W h e n Illl_ _o g r a m IIIL......o c k is o n, y o u c a n n o t u s e Illl_ IllIIIP.
® PiP Settings
The picture from the external video source will be in the main screen and
the picture from the TV's tuner will be in the PiP sub-picture window,
Component, HDMi TV
• IIIIF_llllrlllP:Activate or deactivate the PiP function,
® Select either Air or Cable as the input source for the sub-
screen.
® Channel: Select the channel for the sub-screen,
® Size: Select a size for the sub-picture,
® IIIPosition:Select a position for the sub-picture,
® Sound Select: You can choose to listen to the sound from the Main
picture or the Sub picture,
Changing the Picture Options
m
®
Settings
MENUrlll _ IIIPicture_ Advanced Settings --_ ENTERC}_
Advanced Settings are available in the Standard and Movie modes.
To use, select an option using the A/v/4/_ buttons, and then press ENTERE3_.
[_ When the TV is connected to a PC, you can only make changes to the White
IIIBa_anceand Gamma.
• Dynamic Contrast: Adjusts the screen contrast.
® IIIB_ackTone: Select the black level to adjust the screen depth.
® IIIIlo_esh7one: Adjusts the amount of red in skin tones.
® make
®
IIIRGIIIBOnly Mode: Displays the Red, , and IIIB_uecolor so you can
fine adjustments to hue and saturation.
Co,or Space: Adjusts the range and variety of colors (the color gamut)
available to create images.
To adjust Co,or, IIIRed,Green, IIIB_ue,and
Custom.
set Co,or Space to
®
White IIIBa_ oe: Adjusts the color temperature of the picture so that white
objects look white (instead of, for example, slightly pink or slightly yellow) and
the overall color of the picture looks natural.
2 IIPoint: Adjust each color's luminosity with the offset menu and the
brightness with the gain menu.
III Offset / GoOffset /IIIB-Offset: Adjusts each color's red
darkness,
, green, or blue
R-Gain / GoGain /B-Gain: Adjusts each color's red
brightness.
, green, or blue
Restore 2 point white balance settings to default values,
1 © IIIPoi : Controls the white balance by adjusting the red, green, and blue
brightness over 10 specific levels.
i_ Available when the picture mode is set to Movie. The external input
(source) can be set to any input.
i_ Some external devices may not support this function.
IIIL......eve_:Select a level to adjust 1 0 Point White Balance.
Red: Adjust the red level.
Green: Adjust the green level.
IIIB_ue: Adjust the blue level.
Restore current level's 10 Point White Balance to default values.
®
®
Gamma: Adjusts the primary color intensity.
Reduces power consumption by reducing screen brightness
when the picture on the screen is motionless.
%
%
This function is not supported in 31111:)mode.
When you change the Ce_ , Contrast, or IIIBnghtness, the TV sets
Motion L......ighti to Off.
% Only available in Standard mode.
m
IRiotu Options
[_ MENUE[I] _ IIIPioture_ IIIPioture Options _ ENTERIZ3_
Select an option using the A/v/4/i_ buttons, and then press ENTERE3_.
[_ When the TV is connected to a PC, you can only make changes to Co,or
Tone.
® Co,or Tone
(_ or Warm2 will be deactivated when the picture mode is
Dynamic.
(_ You can adjust and store settings for each external device connected to
an input on the TV.
®
®
IIID[g[ta_Clean View: If the broadcast signal received by your TV is weak, you
can activate the IIIDigi C_ean View feature to reduce any static and ghosting
that may appear on the screen,
[_ When the signal is weak, try each option in Illl}igi C_ean View until the
TV displays the best picture,
Auto Visualization: When you change from one analog channel to another,
displays the signal strength,
%
%
%
Only available for analog channels,
When you press the II/FO button, the TV displays the signal strength bar,
When the bar is green, you are receiving the best possible signal,
MIIII_IIIEGMoise IIIbi r: Reduces MPEG noise to provide improved picture
quality,
®
®
MIDMIIIIIIIIB_ k IIIL......eve_'Lets you select the black level on the screen to adjust the
screen depth.
@_ Available only in HDMI mode (RGB signals).
Sets the TV so that it senses and then processes film signals
from all sources automatically and adjusts the picture for optimum quality.
@9 The Cinema Smooth function is only activated when an HDMI 24Hz
signal is inputted.
@9 Available in TV mode and all external input modes which support SD (480i
/ 576i) and HD (1080i) signals except when connected to a PC.
@9 If the screen does not seem natural, change the IIIFi_mMode option to
Off, Auto1, or Auto2.
®
IIIF_ k optimizer: Deepens blacks on the screen and improves the contrast
ratio.
%
%
When the TV is connected to a PC, IIIB_ k optimizer is deactivated.
When the TV is operating other features, IIIF@_ackoptimizer is deactivated.
(ex. Med ia IIlID_ay,IlllDIllIlllD)
m
},,,,,,:,_ictuO_
_} MENU[]_ _ IIIPioture------>IIIPiotureOff _ ENTERE3_
The screen is turned off but the sound remains on. Press any button except the
volume button to turn on the screen,
m
I s }:_ictu
_} MENU[]_ _ Picture _ Reset Picture _ ENTERE3_
Resets your current picture mode to its default settings.
Cl
Changing the Preset Soun
odes
m
Sound Mode
@9 MENU[El ---, Sound _ Sound Mode _ ENTERC3#
Use the A/v buttons to select an option, and then press ENTERE3#.
® Standard: Selects the normal sound mode.
® Music: Emphasizes music over voices.
® Movie: Provides the best sound for movies.
® C_ear Voice: Emphasizes voices over other sounds.
® Amplify: Increase the intensity of high-frequency sounds to allow a better
listening experience for the hearing impaired.
[_ If Speaker Select is set to IIIExte a_Speaker, Sound Mode is disabled.
I_ S
Adjusting Sound Settin
m
Sound Effect
i_ MENUI_ --_ Sound _ Sound IEffeot --+ ENTERE3_
(standard sound mode only)
Use the A/,v buttons to select an option, and
• DTS TruSurround
®
This function provides a virtual 5,1 channel
through a pair of speakers or headphones
Function) technology,
then press ENTERIB#.
surround sound experience
using HRTF (Head Related Transfer
IDTS Tru IIIDia_og
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialog can be heard more clearly.
®
Use IIEqua_i r to customize the sound setting for each speaker.
IIBa_ance: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
volume level of specific bandwidth frequencies.
Resets the equalizer to its default settings.
%
If Speaker Select is set to IIIExt÷ a_Speaker, Sound Effeot is disabled.
m 3D Audio
[_ MENUI]]] _ Sound _ 3lIDAudio _ ENTERE3_
3D audio technology that provides an immersive sound corresponding to the
effect of 3D video by utilizing audio depth control in perspective.
[_ Available in only when the TV is displaying 3D images.
m
Speaker Settings
_} MENUrN1 _ Sound _ Speaker Settings
ENTER_
®
Speaker Select
If you are listening to the sound track of a broadcast or movie through an
external receiver, you may hear a sound echo caused by the difference in
decoding speed between the TV's speakers and the speakers attached to
your audio receiver. If this occurs, set the -R,/to IIExte a_Speaker.
[_ When you set Speaker Select to IIIExtema_Speaker, the TV's speakers
are turned off. You wiii hear sound through the external speakers only.
When you set Speaker Select to _ Speaker, both the TV's speakers
and the external speakers are on. You wiii hear sound through both.
[_ When Speaker Select is set to IIIExte a_Speaker, the VOLUME and
MUTE buttons will not operate and the sound settings will be limited.
®
i_ If there is no video signal
speakers will be mute.
Auto Volume
, both the TV's speakers and the external
When you change channels, video sources, or content, Auto Volume
automatically adjusts the TV's volume level so that the volume level remains
the same for all sources. For example, if you switch from a streaming video
application to a Blu-ray player or a favorite TV channel, Auto Volume can
modify the volume up to 12db to equalize the sound.
The Auto Volume function has two settings: Horma_ and Night. Normal
applies a normal level of volume adjustment. Night applies a slightly lower
volume level and is ideal for late-night TV viewing. If you want to use the
volume control of a connected source device to control the sound, deactivate
the Auto Volume function. When you use the Auto Volume function with a
source device, the device's volume control may not function properly.
m
[X}igita
[_ MENUI]]]
Out
Sound
IIIDigi Audio
Out --*
ENTERE3_
Digital Audio Out outputs an
the digital audio out jack on
receiver or home theater,
® Audio IIIIbormat:You can
Digital Audio output
uncompressed
the back of the
digital audio signal when you connect
TV to a digital audio in jack on a
select the Digital Audio output format, The available
format may differ depending on the input source,
®
Audio IIID÷_ay:Lets you correct timing mismatches between the audio track
and the video when you are watching the TV and listening to digital audio
output from the TV through an external device such as an AV receiver, When
you select Audio , a slider appears, Use the 4/_ buttons to adjust the
slider, from 0ms .--250ms. Press ENTERE3_ when done.
II
Res Sound
i_ MENU[]_ _ Sound _ IIReset Sound _ ENTERE3_
Reset all sound settings to the factory defaults. Select IIIResetSound, press
ENTERE3_, select Yes in the pop-up, and then press ENTERIZ3_ again.
Cl
Executing initial setup
m
Setup
_} MENU[]_ --_ System --_ Setup --_
ENTER{3_
Configure and memorize channels and set the time when you set up the TV for
the first time or when you reset the TV,
i_ To execute the initial setup, follow the instructions displayed on the TV
screen.
C3
Settin the Time
m
Ti_e
®
@
®
MENUI_ --_ System --_ Time --+ ENTERE3_
The current time will appear every time you press the INFO button.
C_ock: Set the clock to use the various timer features of the TV.
[_ If you disconnect the power cord, you have to set the clock again.
C_ock Mode' Set the current time manually or automatically.
®
®
Auto: The TV sets the current time automatically using the time from a
digital channel.
[_ You must have cable or an antenna connected to the TV to have the
TV set the time automatically.
Manual' Set the current time manually.
[_ Depending on the broadcast station and signal, Auto may not set
the time correctly. If this occurs, set the time manually.
C_ock Set: Set the IIDat÷ and Time,
Select C_ock Set. Select IIDat÷or Time, and then press ENTERE3_. Use the
number buttons or the A/v buttons to enter numbers. Use the 4/i_ buttons
to move from one entry field to the next. Press ENTERE3_ when done.
[_ Available only when C_ock Mode is set to Manual.
IDST: Switches the DST (Daylight Saving Time) function on or off.
[_ This function is only available when the C_ock Mode is set to Auto.
Time Zone:
[_ This function
Time Offset
Select your time zone,
is only available when the C_ock Mode is set to Auto,
Adjusts the time when your TV receives the
time
%
information via Internet, Set the right time by selecting an offset,
The current time will be set through a network if the TV fails to receive
the time information including the broadcast signal from TV stations, (ex:
Watching TV via set-top box, Satellite receiver, or etc)
C3
Using the Sleep Timer
®
®
MENUNTI _ System _ Time _ 8_eep Timer _ ENTERE3_
S_eep Timer lim_: Automatical@ shuts off the TV after a preset period of
time. (80, 60, 90, 120, 150, or 180 minutes).
[_ Use the A/v buttons to select a period of time, and then press
ENTERIZ3_. To cancel the S_eep Timer, select Of[.
C3
Settin the On/Off Timer
@9 MENUITrl --->System --_ Time --_ On Timer <or> Of[ Timer --_ ENTERE3_
Set On Timer so that your TV turns on automatical@ at a time and on a day of
your choosing.
® On Timer: You can set up three separate On Timer configurations.
j_ You must set the clock before you can use On Timer.
Setup: Select Of[, Mon_llki, Mon_Sat, Sat_Sun, or
Manual. If you select Manual, you can choose the days you want On Timer
to turn on your TV.
j_ The ,,/ mark indicates days you've selected.
Time: Set the hour, minute, am/pm, Use the number buttons or the A/v
buttons to enter numbers, Use the 4/_ buttons to change entry fields,
Volume: Set the desired volume level, Use the 4/_ buttons to change the
volume level,
Source: To select the source of the content that will play when the TV turns
on, You can:
® Select TV and have the TV display a specific air or cable channel,
® Select USIIIF_and have the TV play back photo or audio flies from a USB
device,
®
%
Select a source on your TV that you have connected a set-top box to,
and have the TV display a channel from the set-top box,
A USB device must be connected to your TV before you can select USIIIF_,
If you select a source other than _ or USIIIB, you must:
® Have a cable or satellite set-top box attached to that source
® Set the set-top box to the channel you want to watch when the TV
goes on
® Leave the set-top box turned on,
j_ When you select a source other than TV or USIIIB,the Antenna and
Channe_ options wiii disappear,
Antenna (when the Source is set to _): Select Air or Cable,
Channe_ (when the Source is set to _): Select the desired channel,
Music /IIIPhoto (when the Source is set to USIIIB):Select a folder in the USB
device containing the music or photo files you want to play when the TV turns
on automatically,
%
%
%
%
%
If there is no music file on the USB device or you don't select a folder
containing a music file, the Timer function does not operate correctly,
If there is only one photo file in the USB, the Slide Show will not play,
A folder with a name that is too long cannot be selected,
Each USB device you use is assigned its own folder, When using more
than one of the same type of USB device, make sure the folders assigned
to each USB device have different names,
We recommend that you use a USB memory stick or a multi card reader
as your USB source when using On Timer,
The On Timer function may not work with USB devices that have a built-
in battery, MP3 players, or PMPs made by some manufacturers because
these devices take a long time to be recognized,
®
Off Timer: You can set up three separate Off Timer configurations,
[_ You must set the clock before you can use Off Timer.
Setup: Select Of[0 Once° Mon_lllll=ri0Mon_Sat0 Sat_Sun or
Manual. If you select Manual, you can choose the days you want Off Timer
to turn off your TV.
[_ The ,,/ mark indicates days you've selected.
Time: Set the hour, minute, and am/pro. Use the number buttons or the A/v
buttons to enter numbers. Use the 4/_ buttons to change entry fields.
C3
Economical Solutions
m
Eoo Solution
_} MENUrlll _ System --_ IIEooSolution --_ ENTERE3_
• Energy Saving: Lets you adjust the brightness of the TV to reduce power
consumption.
® IIEooSensor: To enhance your power savings, the picture settings will
automatically adapt to the light in the room,
j_ If you adjust Ce_ IIL.....i9in the Picture menu, IIIEooSensor is set to Off.
®
®
Min Ce_ IIIL,,,,,,ig: When III o Sensor is On, lets you manually adjust the
minimum screen brightness,
[_ If III o Sensor is On, the display brightness may change (become slightly
darker in most cases) depending on the surrounding light intensity. You
can control the screen's minimum brightness with the Min Ce_ Illl,,,,,,,,,,,,,,ight
function.
Ho Signa_ IRower Off ' Sets how quickly the TV switches to standby mode if
it is receiving no signal,
[_ This function is disabled when an attached PC is in power saving mode,
Auto IIIIl:_owerOff: The TV will automatical@ turn off if you don't press a button
on the remote control or touch a button on TV's front panel for 4 hours,
Cl
Other Features
m
Menu L,,anguage
[_ MENUI]]] --+ System --_ Menu Language --+
Set the menu language.
[]
[]
ENTERE3,J
Select Menu Illlanguage, and then press the ENTERIZ3_button.
Choose a language, and then press the ENTERIZ3_button.
[_ Choose IIEng_ish_IIEsp o_, or IIIIlo_anqais.
m
IBu IP t@oti©n
j_ MENU[[[] --_ System --_ Screen IIIBu IIIProtection --_ ENTERE3_
To reduce the possibility of screen burn, this unit is equipped with Pixel Shift and
other screen burn prevention technology. Pixel Shift moves the picture slightly on
the screen. The Pixel Shift Time setting function allows you to program the time
between the movement of the picture in minutes.
Your TV has the following screen burn protection functions:
® IIIPixe_Shift
® Auto Protection Time
®
® Side Gray
®
IIIPixe_Shift: Using this function, you can set the TV to move pixels minutely on
the PDP screen in a horizontal or vertical direction to minimize after images on
the screen,
j_ Available Pixel Shift Settings and Optimum Settings
0-4 (pixeis) 4
0-4 (pixeis) 4
Time (minute) 1-4 rain 4 rain
®
%
%
The IIPixe_Shift value may differ depending on the TV'
and the mode,
This function is not available in the Screen IIIFitmode.
s size (in inches)
Auto IIP_oteotion Time: If the screen displays a still image for a period of time
you define, the TV activates the screen saver to prevent the formation of burnt
in ghost images on the screen,
®
®
Scrolling: This function removes after-images on the screen by illuminating all
the pixels on the screen according to a pattern, Use this function when there
are after images or symbols on the screen, especially when you displayed a
still image on the screen for a long time,
[_ The after-image removal function has to be executed for a long time
(approximately 1 hour) to remove after-images on the screen effectively, If
the after-images are not removed after you apply this function, apply the
function again,
% Press any key on the remote control to cancel this feature,
Side Gray' When you watch TV with the screen ratio set to 4:3, using the
Side Gray function can prevent damage to the edges of the screen by
adjusting the white balance on the extreme left and right sides,
m IF:, IIN
j_ MENU[]_ _ System --_ ©hange IIPIIIIIN_ ENTERE3_
When you access Change PIN, the PIN input screen appears, Enter the current or
default PiN, Then, the Change IIIPIIIIINscreen appears, Choose any 4 digits for your
PiN and enter them in Enter New IIPIIIIIN,Re-enter the same 4 digits in Confirm
IIPIIIIIN,When the Confirm screen appears, press the C_ose button, The TV
has memorized your new PIN,
j_ Whenever you access the Change IIPIIIIINfunction, the PiN input screen
appears, Enter the current or default PiN,
The default PIN number for a new TV set is "0-0-0-0",
If you forget the PiN code, press the remote control buttons in the following
sequence in Standby mode, This resets the PiN to "0-0-0-0" : MUTE _ 8
2 _ 4 _ POWER (on)
m Gene _
[_ MENU[]]] _ System _ Genera_ _ ENTERE3_
®
Game Mode: When you have connected a game console such as a
PlayStation TM or Xbox TM to the TV, you can enjoy a more realistic gaming
experience if you set Game Mode on.
[_ NOTE
® Precautions and limitations for Game Mode:
Before disconnecting a game console and connecting another
external device, set Game Mode to Off.
- If you display the TV menu in Game Mode, the screen shakes slightly,
®
®
Game Mode is not available when you've set the input source to TV,
Set Game Mode to On only after connecting a game console, If you
turn Game Mode on before you have attached the game console, you
may notice reduced picture quality,
® If Game Mode is On'
IIPioture Mode is set to Standard and Sound Mode is set to Movie,
• IIII1:_e_Illl,,,,,,,,,,,,,,,ook=Lock or unlock all the keys on the panel,
® Enable/disable the logo that displays when the TV starts up,
m
ID@vX@Video On I[
_} MENU_ -_ System -_ IDivX@ Video On Demand -_ ENTERC}_
Shows the registration code authorized for the TV. if you connect to the DivX
web site and register with 10-digit registration code, you can download the VOD
activation file. Once you play it using Media Play, the registration is complete.
[_ For more information about DivX@ VOD, visit "http://vod,divx,com",
Cl
Using the Source List
m
8ou e List
_} MENU[]_ --_ Applications --_ Source Illl,,,,,,,,,,,,,,,ist---_ENTERE3_
When you press the SOURCE button, the Source screen is displayed
immediately.
You can only choose external devices that are connected to the TV. In the
Source list, connected inputs are highlighted.
For detailed information, refer to "Changing the Input Source" in the paper
User Manual.
C3
Connecting a USB Device
[]
2.
1
1
1
Turn on your TV.
Connect a USB device containing photo, music, or movie files to the USB
port on the side of the TV.
A pop-up window appears. Select IIIIFDhotos,Videos, or Music, and then press
the ENTERE3# button.
The Content screen appears, listing the contents of the device. Depending on
how the contents are arranged, you will see either folders, individual flies, or
both.
If necessary, use the A/T/4/I_ buttons to select a folder, and then press the
ENTERE3# button.
Select a file to view or play, and then press the ENTERIZ3_ button.
For information about controlling playback, go to "Using Media Play" in the
e-Manual.
1
Press the RETURN button to exit a current screen and go to the previous
screen. Press the EXIT button to exit to the TV screen.
1
To disconnect the USB device, go to "Disconnecting a USB Device" in the
e-Manual.
Even though the player will display folders for all Content Types, it will only display
files of the Content Type (11 otos, Videos, or Music) you selected in Step 3. For
example, if you selected Music, you will only be able to see music files. You can
change this by pressing the RETURN button until you are back at the Content
Type Selection screen, and then selecting a different Content Type (Photos,
Videos, or Music).
The TV may not be able to play unlicensed multimedia files properly,
What you need to know before using a USB Device,
®
®
®
®
®
MTP (Media Transfer Protocol)is not supported,
The TV supports the FAT and exFAT file systems,
Certain types of USB Digital camera and audio devices may not be
compatible with this TV,
The TV only supports the sequential jpeg format,
The TV only supports USB Mass Storage Class (MSC) devices, MSCs are
Mass Storage Class Bulk-Only Transport devices, Examples of MSCs are
Thumb drives and Flash Card Readers, USB HUBs are not supported,
Devices should be connected directly to the TV's USB port,
®
®
®
®
®
®
Before connecting your device to the TV, please back up your files to
protect them from damage or loss of data, SAMSUNG is not responsible
for any data file damage or data loss,
Do not disconnect the USB device while it is loading or transferring files,
The higher the resolution of the image, the longer
the screen,
it takes to display on
The maximum supported JPEG resolution is 15360 x 8640 pixels.
The TV displays the "Not Supported File Format"message when it
encounters unsupported or corrupt files,
The USB Videos function does not support the scene search and
thumbnail functions,
® MP3 files with DRM that you have downloaded from a commercial site
cannot be played, Digital Rights Management (DRM)is a technology
that supports the creation, distribution, and management of content
in an integrated and comprehensive way, This includes protecting the
rights and interests of the content providers, preventing illegal copying of
contents, and managing billing and settlements,
® PTP connection mode is fully available only with digital cameras, When
connecting a smartphone or tablet to the TV using PTP mode, it may not
be recognized,
® A USB device that requires high power (more than 500mA or 5V) may
not be supported, The TV does not support HDDs (Hard Disk Drives)
connected to the USB port,
® If the TV receives no input during the time set in Auto IIIIFD_otection Time,
the screen saver will run,
® The power-saving mode of some external hard disk drives may be
released automatically when connected to the TV,
® If you use a USB extension cable, the TV may not recognize the USB
device or may not be able to read the files on the device,
® If a USB device connected to the TV is not recognized, the list of files on
the device is corrupted, or a file in the list is not played, connect the USB
device to a PC, re-format the device, and then copy the files onto the
device again,
® If a file you deleted from your PC is still found on the USB device, re-
attach the USB device to your PC, delete the file, and then use the "Empty
the Recycle Bin" function on the PC to permanently delete the file,
® If the number of files and folders saved on a USB storage device is over
approximately 4000, some files and folders may not appear, and the TV
may may not be able to open some of the folders,
Disconnecting a USB Device
1. Press the SOURCE button.
2. Select the USB device, and then press the TOOLS button. The Too_s menu
appears.
3. Select Remove USIIIB, and then wait until the USB device is disconnected.
After the device is disconnected, remove the USB device from the TV.
(_ To remove a USB device from the TV, we recommend that you use the
IIIRemove USIIIB function.
O
Using edia Play
_} MENU[]_ --+ Applications --+ Media IIIP_ay--+ ENTERE3_
Enjoy photos, music, and movie flies saved on a USB Mass Storage Glass (MSC)
device.
[]
2.
Insert a USB device into the USB jack on the side of the -R,/.
Press the MEDIA.P button on your remote or select Media IIP_ayin the TV's
menu.
[]
[]
The Content Type screen appears. Select IIIIF>hotos,Videos, or Music, and
then press the ENTERE3_ button.
The Content screen appears, listing the contents of the device. Depending on
how the contents are arranged, you will see either folders, individual flies, or
both.
1
If necessary, use the A/'v/4/i_ buttons to select a folder, and then press the
ENTERIB_ button.
1
1
1
Select a file to view or play, and then press the ENTERIB_ or _ button on
your remote.
For information about controlling playback, go to "Playing selected files" and
"Controlling Photo /Video / Music Playback" in the e-Manual.
Press the RETURN button to exit a current screen and go to the previous
screen. Press the EXIT button to exit to the TV screen.
1
To disconnect the USB device, go to "Disconnecting a USB Device" in the
e-Manual.
Even though the player will display folders for all Content Types, it will only display
files of the Content Type (11 otos, Videos, or Music) you selected in Step 3. For
example, if you selected Music, you will only be able to see music files. You can
change this by pressing the RETURN button until you are back at the Content
Type Selection screen, and then selecting a different Content Type (Photos,
Videos, or Music).
Playing selected files (Creating a play list)
These instructions apply to all content, IIIIF_hotos, Videos, and Music.
1. On a screen displaying content, press the A button to select Options at the
top right of the screen, and then select IIIP_ay Selected.
1 Select the desired flies,
%
%
A check appears to the left of each selected file.
Press the ENTERIZ3_button again to deselect the file.
1
Press the A button to select IIIP_ayat the top of the screen, and then press
the ENTERE3_ button. The flies you selected play.
[_ You can select or deselect all flies by selecting Select A_/IIIDese_eot A_,
and then pressing the ENTERIZ3_button.
_3
Controlling Photo /Video / usic Playback
When playing a video or photo file, press the ENTERIB_ button to display the
playback controls. The playback controls for music are displayed at the bottom
left of the screen automatically when you play a music file.
If the option menu is not displayed, press the TOOLS button.
You can also use _/,_/m/F_/[-_-] buttons on the remote control during
playback to control playback.
If you press the INFO button during playback, you can view the playback
information.
Playback controls
These buttons appear on the bottom of the screen when you press the TOOLS button
while playing back photos or videos. Some are displayed automatically when you play
a music file.
®
* When you set Background IIIl_usioto Mini Player in Photos, these buttons appear.
Content Settings buttons
®
These buttons appear on the bottom of the screen when you
ENTERE3_ button while playing back photos.
press the
S_ideshow Settings Lets you set the Speed and Effects during the slide show.
Lets you zoom into (enlarge)images in full screen mode.
Rotate Lets you rotate images in full screen mode.
.........Background Music Lets you set background music when watching a slide show.
Picture Mode / Sound Mode: Lets you select the picture or
sound mode. (Dynamic, Standard, etc./Standard, Movie, etc.)
_nformation: Lets you see detailed information about the file
being played.
®
During a slide show, all files in the file list are displayed in order,
When you press the _ (Play) button (or A button _ Options _ S_ide Show)
on a screen displaying photos, the slide show starts immediately,
During the slide show, you can adjust the slide show speed using the
(REW) or _ (FF) button,
Supported Photo Formats
[_ For the details, refer to "Specifications" in the paper user's manual,
• Videos
These buttons appear on the bottom of the screen when you
ENTERE3_ button while playing back videos,
press the
Search Titbs: Lets you select and start other video files directly.
Search Time bar: Lets you search the video at one minute intervals
using the 4 and !_ buttons or by entering a time value directly.
(D The Search Time bar may not be supported depending on the
input source.
Repeat Mode Lets you automatically play movie flies repeatedly.
Picture Size Lets you adjust the picture size to your preference.
Subtitle Settings: Lets you play a video with subtitles. This function
only works if the subtitles have the same file name as the video. For
example, Bats.mp4 and Bats.smi.
Picture Mode / Sound Mode: Lets you select the picture or sound
mode (Dynamic, Standard, etc./Standard, Movie, etc.)
_nformation: Lets you see detailed information about the file being
played.
®
If video time information is unknown, play time and the progress bar are not
displayed,
In video playback mode, you can watch movie clips contained in a game, but
you cannot play the game itself,
Supported Subtitle /Video Formats
[_ For the details, refer to "Specifications" in the paper user's manual,
• Music
These buttons appear automatically on the bottom left of the screen when you
play a music file,
Lets you automatically play music files repeatedly.
Lets you play the music files randomly.
®
The TV only displays the flies with supported music file extensions, Other file
extensions are not displayed, even if they are saved on the same USB device,
If the sound is abnormal when you play music flies, adjust the IIIEqua_i r
in the Sound menu, (An over-modulated music file may cause a sound
problem,)
Supported Music Formats
[_ For the details, refer to "Specifications" in the paper user's manual,
Setting the Encoding language
Set the encoding language if the text you want to view does not appear correctly.
1. Press the A button to select Options at the top of the music main screen,
and then select IIIEnooding.
2. Select the desired encoding language.
C3
Using the 3D function
Viewing TV using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
Read and understand the following safety information before using the TV's 3lID
function,
!_WARNING
® Some viewers may experience discomfort while viewing 3D TV such as
dizziness, nausea and headaches, If you experience any such symptoms,
stop viewing 3D TV, remove the 3D Active Glasses and rest,
® Watching 3D images for an extended period of time may cause eye
strain, If you feel eye strain, stop viewing 3D TV, remove your 3D Active
Glasses and rest,
® A responsible adult should frequently check on children who are using the
3D function. If there are any reports of tired eyes, headaches, dizziness,
or nausea, have the child stop viewing 3D TV and rest.
® Do not use the 3D Active Glasses for other purposes (such as general
eyeglasses, sunglasses, protective goggles, etc.)
® Do not use the 3D function or 3D Active Glasses while walking or moving
around. Using the 3D function or 3D Active Glasses while moving around
may result in injuries due to running into objects, tripping, and/or falling.
Before using the 3D function...
® 3D Active Glasses from Samsung's previous product (IR type) or other
manufacturers are not supported.
® After the TV is initially powered on, it may take some time until the 3D display
is optimized.
®
®
The 3D Active Glasses may not work properly if there is any other 3D product
or electronic devices turned on near the glasses or TV, If there is a problem,
keep other electronic devices as far away as possible from the 3D Active
Glasses,
Be sure to stay within the viewing angle and optimum TV viewing distance
when watching 3D pictures, Otherwise, you may not be able to enjoy proper
3D effects,
® The ideal viewing distance is three times or more the height of the screen, We
recommend sitting with your eyes level with the screen,
® If you cannot play 3D videos on your Blu-ray player, take out the disk and then
put it in again, or restart the Blu-ray player,
m
_} MENU[]_ _ IIIPioture_ 31111}_ ENTERE3_
This exciting new feature enables you to view 3D content.
"Full HD 3D Glasses TM''Logo indicates compatibility between display
products and 3D Glasses which are compliant with the "Full HD 3D
GlassesTM" format, and does not indicate the picture quality of display
products.
[_ Some 3D modes may not be available depending on the format of the image
SOUrCe.
When you watch 3D images under flickering lighting such as a fluorescent
lamp (50Hz _-60Hz ) or a 3 wavelength lamp, you may notice some screen
flickering. If this occurs, dim or turn off the light.
®
If you want to feel the 3D effect fully, please put on the 3D Active Glasses
first, and then select a 31111:}Mode from the list below that provides the best 3D
viewing experience,
Off Turns the 3D function off.
Changes a 2D image to 3D.
2D --_ 3D
1_ Some file formats may not be supported.
Side by Side Displays two images next to each other.
Displays one image above another.
i_ 31111:}Mode is set to Off automatically when you access Media IIP_ayor the
eoManua_ functions,
3D Mode is set to a memorized configuration value automatically when
you change the input source.
®
®
®
®
31111}IIIPerspective: Adjust the overall 3D perspective of the on-screen image,
Depth: Adjust overall depth,
IIIL,,,,,,/IIIRChange: Swap the left and right pictures,
3lID >2lID:Displays the image for the left eye only,
[_ This function is deactivated when 3D Mode set to " " or" ",
Supported
® HDMI
resolutions (1 6:9 only)
1280 x 720p 59.94 / 60 Hz
1920 x 1080i 59.94 / 60 Hz
1920 x 1080p 23.98 / 24 / 29.97 / 30 / 59.94 / 60 Hz
Frame Packing
1280 x 720p
1920 x 1080i
1920 x 1080p
59.94 / 60 Hz
59.94 / 60 Hz
23.98 / 24 / 29.97 / 30 Hz
® Components & DTV
®
Components 1280 x 720p 59.94 / 60 Hz
1920 x 1080i 59.94 / 60 Hz
1920 x 1080p 23.98 / 24 / 29.97 / 30 / 59.94 / 60 Hz
DTV 1280 x 720p 59.94 / 60 Hz
1920 x 1080i 59.94 / 60 Hz
Videos /IIIPhotos (In Media IIIP_ay)
For the details, refer to "Specifications"
in the paper user's manual,
C3
Viewing the e-
anual
m
eoM
[_ MENUI_ _ Suppo_ _ eoManua_ _ ENTEREZ}_
Provides instructions that explain how to use the features of your TV.
[_ For detailed information about using the e-Manual Screen, refer to
view the e-Manual" in the paper user's manual.
"How
to
Cl
Using Self Diagnosis
m
8e_f Diagnosis
_} MENU[]]] --+ 8uppo_ -_ 8e_f Diagnosis -_
ENTERE3_
®
IIIPiotureTest: Use to check for picture problems, Picture test displays a high
definition picture that you can examine for flaws or faults,
Yes: Select Yes if the test picture does not appear or there is noise or
distortion in the test picture, There may be a problem with the TV, Contact
Samsung's Call Center for assistance,
No: Select No if the test picture displays properly, There may be a problem
with your external equipment, Please check your connections, If the problem
persists, refer to the external device's user manual,
®
Sound Test: Use to check for sound problems, Sound test plays a built-in
melody that tests both speakers,
[_ If you hear no sound from the TV's speakers, make sure Speaker Select
is set to _ Speaker in the Sound menu, and then try the speakers
again before performing the sound test,
[_ You wiii hear the melody during the test even if you have set Speaker
Select to III tema_ Speaker or have muted the sound by pressing the
MUTE button,
Yes: Select Yes if you can hear sound from only one speaker or from neither
speaker during the sound test, There may be a problem with the TV, Contact
Samsung's Call Center for assistance,
Ho: Select No if you can hear sound from the speakers, There may be a
problem with your external equipment, Please check your connections, If the
problem persists, refer to the external device's user manual,
® Signa_ IIIIIormation: (digital channels only) The reception quality of over-
the-air HD channels is either perfect or the channels are unavailable, Signal
Information displays HD channel signal strength so you can adjust your
antenna to increase signal strength and receive HD channels,
® Reset all settings to the factory defaults except network settings,
%
%
The PIN input screen appears before the setup screen.
Enter your 4-digit PiN or the default PiN (0000) if you have not set your
own PiN. You can change the PiN using the Change IIPIIIIINoption. (MENU
---, System ---, Change IIPIIIIIN---, ENTERE3_)
Updatin
the Software
m
[_ MENUFFrl _ 8uppo_ _ Software Update _ ENTERC3_
The Software Update menu lets you upgrade your TV's software to the latest
version.
Current Veto: This is the software version already installed in the TV.
®
Update now: You can perform a Software Update by downloading the latest
firmware from www.samsung.com to a USB memory device, attaching the
device to your TV, and then selecting Update now.
To upgrade the software, follow these steps:
[]
2.
3.
[]
5.
[]
7.
8.
Visit www.samsung.com.
Click SUPPORT on the top right of the page.
Enter the product's model number into the search field. As you enter the
model number, a drop down will display products that match the model
number.
Left click your product's model number in the drop down list.
On the page that appears, scroll down to and then click Firmware
Manuals & Downloads.
Click Firmware in the center of the page.
Click the ZiP button in the File column on the right side of the page.
Click Send in the first pop-up that appears. Click OK in the second pop-
up to download and save the firmware file to your PC.
10.
11.
12.
13.
14.
9. Unzip the zip archive to your computer. You should have a single folder
with the same name as the zip file.
Copy the folder to a USB flash drive.
In the TV's menu, go to SuppoA _ Software Update.
Select Update now.
The TV searches for the software on the USB drive. When it finds the
software, the Update III quest pop-up appears.
Select OIIIK.The TV upgrades the software, turns off, and then turns on
automatically.
Be careful not to turn off the power until the update is complete. The TV will
turn off and on automatically after completing the firmware update. When you
update software, all video and audio settings you have made will return to
their default settings. We advise you to write down your settings so that you
can easily reset them after the update.
Cl
Changing the Use
0 e
m
Use Mode
[_ MENU[]]:] _ Suppose _ Use Mode _ ENTERE3_
Select the Use Mode suitable for the location in which you will use the TV. We
strongly recommend you select Home Use.
[_ If your TV has been unintentionally set to Store Demo, you can change the
mode with this option.
®
®
Home Use: Home Use is the default setting.
Store IIIDemo:Store IIIDemois for retail environments only. If you select Store
IIIDemo,some functions will not work and the picture settings will be reset
every 30 minutes.
C3
Viewing Contact Samsun
m
Contact
(_ MENU[[]] _ SuppoA _ Contact Samsung _ ENTERC3#
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information about our call centers and how to
download products and software.
Cl
Using the Soccer Mode
m
@9 MENU[]_ --_ Applications --_ Soccer Mode --_ ENTERE3_
This mode provides optimized condition for watching games.
® _! Pause playback and divide the picture into 9 parts. Select a part
to zoom it in,
i_ This functions is not available in the U,S, and Canada,
When the Soccer Mode is On, the picture and sound modes are set to
Stadium automatically,
If you turn the TV off while watching Soccer Mode, the Soccer Mode will be
disable,
_3
Using the Wireless
etwork
For the details, go to www.samsung.com _ GET SUPPORT _ Find Product
Support.
On the Support page, enter your TV's model number.
Select your model from the drop down list that appears, and then press the
Enter button.
On the Support page for your model, enter Wireless Network into the Search
FAQs and How-Tos field, and then press the Enter button.
_3
anaging the Network Connected Devices
For the details, go to www.samsung.com _ GET SUPPORT _ Find Product
Support.
On the Support page, enter your TV's model number.
Select your model from the drop down list that appears, and then press the
Enter button.
On the Support page for your model, enter Network Connected Devices into
the Search FAQs and How-Tos field, and then press the Enter button.
_3
Using the DLNA Functions (AlIShare TM)
For the details, go to www.samsung.com _ GET SUPPORT _ Find Product
Support.
On the Support page, enter your TV's model number.
Select your model from the drop down list that appears, and then press the
Enter button.
On the Support page for your model, enter either DLNA functions or AIIShare
into the Search FAQs and How-Tos field, and then press the Enter button.
