9L
VACUUM OIL/FLUID
EXTRACTOR
81315
SPECIFICATION
Stock no. .............................................................................................................................................81315
Part no. ............................................................................................................................................. MFE9L
Reservoir capacity......................................................................................................................................9L
Dimensions .................................................................................................250 (L) x 320 (W) x 620mm (H)
Hose dimensions; ............................................................................................................. 4mmØ x 1130mm
............................................................................................................. 6mmØ x 1130mm
........................................................................................................... 10mmØ x 1120mm
Nett weight (empty) .................................................................................................................................. 4kg
SAFETY INSTRUCTIONS
•
Always wear ear and eye protection.
•
Used engine oil is carcinogenic - wear protective gloves.
•
Always store in an upright position in a secure place.
•
Keep out of the reach of children.
EXTRACTOR OPERATION
NOTE: Prior to connection consult vehicles handbook or Haynes manual as this may not be suitable for
all vehicles.
OIL EXTRACTION: Ensure the vehicle is on level ground before use. Select the most
suitable nozzle for the job in hand and insert into the pickup hose.
Remove dipstick and insert tube fully down the dipstick tube, raise the handle
to the highest point and pump several times full strokes to create a vacuum.
This will create a consistant and automatic flow.
RELEASING PRESSURE:
To release the pressure simply push down on the spring
loaded safety pressure release valve until the pressure has completely dropped.
NOTE: Do not allow waste fluid types to mix in the reservoir. Dispose of waste
fluids in accordance with the relevant environmental health and safety guidelines.
To empty the reservoir, remove the reservoir cap and pour into a suitable
storage/transport container.
IDENTIFICATION
Probe 1 - 4mmØ x 1130mm
Probe 2 - 6mmØ x 1130mm
Probe 3 - 10mmØ x 1120mm
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK
.
DBJB1117
Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 internet: drapertools.com email: [email protected]
