Loading ...
Loading ...
Loading ...
CARTON CONTENTS
The following parts are shipped loose with your
pressure washer:.
= Main Unit-- pressure washer with wheels,
guide handle,,
High Pressure Hose
o Parts Box (which includes items listed below)
. Spray Gun
. Nozzle Extension
. Hi/Lo Adjustable Nozzle.
• Turbo Nozzle
o Engine Oil
• Manual Bag (which includes the items listed
below)
o Owner's Manual
° No_le Cleaner Kit
, "O"-Ring Kit
Become familiar with each piece before assembling
the pressure washer° Check all contents against the
illustration on Page 5._If any parts are missing or
damaged, call the Pressure Washer Helpline at 1-800-
222-3136.
TO REMOVE PRESSURE WASHER FROM
CARTON
= Remove loose parts and parts box included with
pressure washer..
° Slice two corners at guide handle end of carton
from top to bottom so the panel can be folded
down flaL
Raise guide handle, secure in place and roll the
pressure washer out the open end of the carton°
/
Check carton for additional loose parts,.
Lift the handle to
upright position and
slide the locking
caps into place.
HOW TO SET UP YOUR PRESSURE
WASHER
For the most part, your Craftsman High Pressure
Washer has been assembled at the factory. You must,
however, assemble the spray gun, and attach the high
pressure hose to the pump and spray gun.
° Cut the tie wraps on the high pressure hose and
connect high pressure hose to gun,.Tighten by hand..
• Remove plastic cap and connect high pressure
hose to pump. Tighten by han&
The high
pressure outlet
is on this side of
the unit below
the engine
°
°
Attach nozzle extension to spray gun by aligning
the locking tabs on the extension with the grooves
in the gun. Push extension inward and twist
clockwise to lock in place.
Attach desired nozzle onto nozzle extension._
Place assembled spray gun on holder.
Loading ...
Loading ...
Loading ...