Loading ...
Loading ...
Loading ...
COMPU LINK connection
JVC's COMPU LINK Remote Control System provides unified control
over system components connected with COMPU LINK. Connecting
JVC audio components with the COMPU LINK jacks automatically
controls relative operations between components and facilitates vari-
ous operations. With the COMPU LINK connection to an amplifier or
receiver, you can operate XL-F254BK]XL-F154BK with the amplifier or
receiver's remote control unit. Synchronized recording is also avail-
able with this feature.
Connecting the COMPU UNK cord
The COMPU LINK-3 SYNCHRO jacks are used to output and input the
control signal for the COMPU LINK remote control system,
COMPU LINK-compatible products are provided withthe jacks marked
COMPU LINK-l, COMPU LINK-2 or COMPU LINK-3, referring to the
COMPU LINK version, XL-F254BK/XL-F154BK isequipped withCOMPU
LINK-3, You can connect XL-F254BK/XL-F154BK also to acomponent
with lower COMPU LINK versions, But, in that case, only the lower
versions' features will be available,
Plug the supplied COMPU LINK cord into the COMPU LINK-3 SYNCH RO
jack on the rear panel of XL-F254BK/XL-F154BK. Plug the other end
into the COMPU LINK jack of the other component. If there are two
COMPU LINK jacks, plug it into either of them.
ConnectingtheCOMPU LINKsystemcomponents withtheCOMPU
LINK cords
SuppliedCOMPU LINKcord
Amplifier or receiver CO prayer
Cass_ed_k Turntable
BEFORE USINGFOR THEFIRST TIME
Loading ...
Loading ...
Loading ...