TARG4B36G OWNER & OPERATOR INSTRUCTION MANUAL

OWNER & OPERATOR INSTRUCTION MANUAL - Page 7

For TARG4B36G. Also, The document are for others Radiance models: TAR-4, TAR-24G, TAR-24RB, TAR-6, TAR-36G, TAR-36RB, TARG-4B12G, TARG-12G4B, TARG-2B24G, TARG-24G2B, TAR-8, TARG-6B12G, TARG-12G6B, TARG-2B36G, TARG-36G2B, TARG-4B24G, TARG-24G4B, TAR-10, TARG-8B12G, TARG-12G8B, TARG-6B24G, TARG-24G6B, TARG-36G4B, TARG-2B48G, TARG-48G2B, TARG-6B24RG, TARG-24RG6B

Loading ...

INSTALLATION & OPERATION INSTRUCTION

60” RANGE REQUIRES TWO GAS CONNECTIONS

The gas inlet line size of this unit is ¾” NPT. For proper installation, the gas service supply line must

be the same size or greater than the inlet line size of the unit. Each gas connection or inlet should

have an individual, dedicated line to the main gas supply.

The gas pressure regulator must be installed in each gas line (failure to install a pressure regulator

will void the warranty). The arrow on the bottom of the regulator should be pointing toward the unit

The regulators supplied with ranges have ¾” NPT connections. Be sure the regulator matches the

gas type that is being used on the unit.

- Natural gas: 5” W.C. manifold gas pressure

- Propane gas : 10” W.C. manifold gas pressure

Before connecting the regulator, check the incoming line pressure – as these regulators can only

withstand a maximum inlet pressure of 14” W.C. (exceeding this pressure will damage them).

IMPROPER INSTALLATION

PROPER INSTALLATION

- Natural gas: 5” W.C. manifold gas pressure

- Propane gas : 10” W.C. manifold gas pressure

Loading ...