Loading ...
Loading ...
Loading ...
WARNING! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that it is
disposed of safely.
LEVELLING
When placing the appliance make sure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
REAR SPACERS
In the bag with the documentation, there are two
spacers which must be fitted as shown in the
figure.
If you position the appliance against a wall in a
freestanding installation, install the rear spacers in
order to guarantee the maximum possible distance.
DOOR REVERSIBILITY
Reversing the door swing is not possible.
OPERATION
SWITCHING ON AND OFF
To switch on the appliance, insert the plug into the
wall socket.
When the appliance is switched on for
the first time, the interior light may turn
on after a one-minute delay due to
opening tests.
To disable all the functions, activate
the Standby mode. Refer to the
"Standby mode" section.
To switch off the appliance, unplug it.
TEMPERATURE REGULATION
The temperature is regulated automatically.
However, you can set a temperature inside the
appliance yourself. Turn the temperature regulator
to a higher position to lower the temperature inside
the appliance.
Thermostat settings:
• 1 - 2: for short-term storage of food in the
freezer compartment.
• 3 - 4: for long-term storage of food in the
freezer compartment.
• 5 - MAX: for freezing fresh food. Once the food
in the freezer compartment is fully frozen, reset
the thermostat to its original position.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most suitable
one.
DAILY USE
REMOVING AND INSTALLING THE DOOR
SHELF
To remove the door shelf:
1. Hold the left side of the shelf.
8
Loading ...
Loading ...
Loading ...