Loading ...
Loading ...
Loading ...
5. HEALTH AND SAFETY INFORMATION
– 8 –
If any part of this oscillating spindle sander breaks, bends, or fails in any way, or any electrical
component fails to perform properly, or if any part is missing, turn off power switch, remove plug
from the power supply and replace damaged, missing and/or failed parts before resuming
operation.
Do not sand with the workpiece unsupported. Support it with the backstop or worktable. The only
exception is curved work performed on the outer end of the belt (idler roller).
Safety is a combination of operator common sense and alertness at all times when the sander is in
operation.
Caution: This oscillating spindle sander is designed solely for wood and nonferrous metals only.
Any other materials will cause damage to the product or risk of fire.
5.3 RESIDUAL RISK
Important: Although the safety instructions and operating manuals for our tools contain extensive
instructions of safe working with power tools, every power tool involves a certain residual risk
which can not be completely excluded by safety mechanisms. Power tools must therefore always
be operated with caution!
5.4 CONNECTION TO THE POWER SUPPLY
Caution: Risk of electric shock. Do not open.
This appliance is supplied with an approved plug and cable for your safety. The value of the fuse
fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute
is of the correct rating, approved to BS1362 and ASTA or BS Kite marked.
ASTA
BSI
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced
before attempting to connect the plug to an electrical outlet. If the cover is missing, a replacement
must be obtained or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable should be disabled to prevent
connection to a live electrical outlet.
This appliance is Class I
†
and is designed for connection to a power supply matching that detailed
on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance.
Follow all the instructions supplied with the extension lead.
†
Earthed
: This product requires an earth connection to protect against electric shock from
accessible conductive parts in the event of failure if the basic insulation.
IMPORTANT
If using an extension lead, follow the instructions that came with your lead regarding
maximum load while cable is wound. If in doubt, ensure that the entire cable is unwound.
Using a coiled extension lead will generate heat which could melt the lead and cause a fire.
Loading ...
Loading ...
Loading ...