Loading ...
Loading ...
Loading ...
Forward and Reverse Speed
Adjustment
(Figure 14)
IMPORTANT: The unit should track within 2
feet (0.61 m) of a straight line for 30 feet
(9.14 m).
The travel of the steering levers may need
adjustment if:
The unit turns to the right or left when
both steering levers are pushed as far
forward as possible.
The unit turns to the right or left when
both steering levers are pulled back as
far rearward as possible.
NOTE: The side the unit turns toward
indicates that the wheel on that side is turning
slower than the other wheel. Either the wheel
that is turning faster needs to slow down or
the wheel that is turning slower needs to be
sped up to allow the unit to travel in a straight
line.
1. Determine which way the unit turns.
NOTE: The forward travel adjustment bolt
adjusts the forward travel of the steering
lever. The rear travel adjustment bolt adjusts
the rearward travel of the steering lever.
2. Adjust speed by:
Turning adjustment bolt clockwise to
decrease steering lever travel.
Turning adjustment bolt
counterclockwise to increase steering
lever travel.
2 3 1
1. Forward Travel Adjustment Bolt
2. Rear Travel Adjustment Bolt
3. Steering Lever
Figure 14
REPLACING PTO BELT
Remove (Figure 15)
1. Lower mower deck to the ground.
2. Remove belt covers from mower deck.
CAUTION: Use care when
releasing idler spring tension.
Keep body parts well away from
idler when performing this
operation.
3. Pull idler arm towards outside of unit
until tension is removed from PTO belt.
4. Remove PTO belt from left mower deck
pulley.
5. Slowly release idler arm until tension is
removed from idler spring.
6. Remove PTO belt from mower deck and
electric clutch.
4
3
1. Electric Clutch
2. Idler
3. Belt Cover
4. PTO Belt
Figure 15
Install (Figure 15)
NOTE: Do not install PTO belt on left mower
deck pulley in step 1.
1. Install PTO belt on electric clutch and
mower deck.
2. Pull idler arm towards outside of unit
until PTO belt can be routed around left
mower deck pulley.
3. Slowly release idler arm until idler pulley
rests firmly against PTO belt.
4. Install belt covers on mower deck.
GB - 23
Loading ...
Loading ...
Loading ...