Loading ...
Loading ...
Loading ...
Automatic Ice and Water Dispenser
)o not use the ice chute as a handle when
removing or replacing the ice storage bin,
Surfaces there may be sharp.
Do not put fingers up ice chute. Surfaces
there may be sharp. •
CLEANING THE ICE DISPENSER
Clean the drepenser and _cecontainer at regular mtervals,parttcularly
before you take a vacatton or move, or If the _cedispenser sttcke
1 Stop iceproduction by hftmgthe w_res_gnalarm to the "up" or OFF
posltbon
2 Remove icecontainer bylifting up and out.Empty and carefully clean
the container with mild detergent Rinse wtthclear water. Do not use
harshor abrastvecleaners.Allowtcecontainertodry completelybefore
replacing in the freezer.
3 Remove tcech_psand clean the shelfand chute thatsupports the ice
container.
4. Replace the icecontainer Lower the wire s_gnalarm on the ice
maker to the "down" or ON postt_onand the Ice maker wtll resume
production.
IMPORTANT: When removingor replacing the tce bm, do not
rotatethe auger inthe tcebin. Ifthe auger isaccidentallyturned,
youmustrealigntheaugerbyturning_tin90°turnsuntil thetcebin
fitsintoplacewiththedrivemechanism.
Remove and empty the ice storage bin if:
1. Anextendedpowerfatlure(onehourorlonger)causesicecubesin
the _cestorage bmtomeltandfreeze together andjamthe dispenser
mechanism.
2_ The tcedispenser isnot usedfrequently. Icecubes will freezetogether
in the bmand jam the dispenser mechanism. Removethe ice storage
bm and shake to loosen the cubes.
NEVER use an ice p=ckor slmdar sharp instrument to break up the tce.
This could damage the _cestorage bin and d_spensermechanism.
14
Loading ...
Loading ...
Loading ...