Loading ...
Loading ...
Loading ...
Automatic Ice and Water Dispenser
ICE AND WATER DISPENSER FEATURES
The ice and water dispenser conventently dispenses chilled water, and tce cubes or crushed ice, depending on the model
To operate the icedispenser, selectthe iceoption desired usingthe touchpad Press aglass against thedispensing paddle
as far up as possible to catch all ice Tostop dispensing ice, pull glass away from dispensing paddle. Do not remove the
glass until the ice hascompletely dispensed. (Complete instructionsfor the dispenser operation are attached to the inside
of the freezer door )
How the Water Dispenser Works
The watertank, locatedbehind the drawers in therefngerator compartment, automatically fills aswater isdispensed. For
proper d_spenser operation, the recommended supply water pressure should fall between 20 psi and 100 psi.
Waterpressure mustnotexceed 100Ibs.Excessivepressurernsycausewaterfittartomalfunction.
After the refrigerator is connected to the water supply, fill the water tank by drawing one glass of water. It may take about
11/=minutes after act]rating the dispenser paddle before water begins to fill this first glass. Continue flushing the system
for 3 minutes to rid the tank and plumbing connections of any impurit]es The water dispenser has a built in shutoff device
that wdl stop the water flow after 3 m_nutes of continuous use. Simply release the dispenser paddle to reset the shutoff
mechanism
Chemicals from a maffunctioningsoftenercandamage the icemaker. Ifthe icemaker isconnected
to soft water, ensure that the softener is maintained and working properly.
How the Ice Dispenser Works
The icemaker and containerare located in the top ofthefreezer compartment After the
refrigeratorisinstalled properlyand has cooledfor several hours,theicemakercanbegin
making icewdhin24 hours.Airinnewplumbtnglinesmay causetheice makertocycletwo
orthreettmesbefore making a fulltrayofice.To beginiceproduction,lowerthew_restgnal
armtothe"down" orON postt_on.Withno usageitw_lltake approximately2 daystofillthe
_cecontainerThe icemakerturnsoffautomaticallywhenthe tcecontainerbecomes full To
_._ stop the ice maker, lift the wire signal arm until _tchcks, and locks in the "up" or OFF
position.
Becauseof newplumbing connections, the5rstproduct]onof icecubes maybe discolored
or haveanodd flavor.These should bed_scardeduntdthecubesmadearefreeofdiscolorat=on
and taste
ICE DISPENSER TIPS
Ice cubes stored too long may develop an odd flavor Empty the _cecontainer and ensure that the wire signal arm is
in its "down" or ON position. The ice maker will then produce more ice
Occasionally shake the ice container to keep =ceseparated.
Keep the wire signal arm in its "up" or OFF position until the refngerator is connected to the water supply or whenever the
water supply tstumed off
IMPORTANT: Youricemaker isshipped withthe wire signalarm in theON position Toensureproperfunction of
yourice maker,hookupwatersupplyimmediately orturnicemakerOFF bylifting thewirestgnalarmuntilitclicks
and locksintheUP posibon.Ifthe icemakarisnotturnedoffand thewatersupplyisnotconnected,thewatervalve
wtllmake a loud chatteringno_se.
If the dispensing paddle is pushed for more than 4 minutes, the dispenser motor may overload
and stop. The overload protector will reset automatically after 3 or 4 minutes.
If a large quant=tyofice is needed at one t]me, it is best to remove cubes dtrectly from the ice container.
The following sounds are normal when the ice maker _soperating
Motor running Running water
Ice dropping into icecontainer Stop the =cemaker when cleaning the freezer and dunng vacations.
Water valveopen=ngor closing If the Ice maker w_ltbe turned off for a long penod of t]me, turn the
Ice loosening from tray water supply valve to the closed pos=t=on
13
Loading ...
Loading ...
Loading ...