Loading ...
Loading ...
Loading ...
11
● Always keep the backsheet of the panel free from foreign objects or structural elements, which
could come into contact with the panel, especially when the panel is under mechanical load.
● Ensure panels are not subjected to wind or snow loads exceeding the maximum permissible
loads (176lbs/80kg), and are not subjected to excessive forces due to the thermal expansion
of the support structures.
Installation
1. Affix panels to roof by screwing appropriate mounting hardware through Z-Bracket holes
into roof. Install solar panel on a relatively flat surface on the roof.
(fasteners not
included, #10 screws
recommended)
NOTE:
● Ensure screw locations are backed by a solid structure such as a rafter, stud, etc.
● Apply self-leveling adhesive (not included) to the bottom of the Z-Brackets to create a
water tight seal.
2. Mount the solar panel such that at least 2 of the mounting feet have screws penetrating the
metal or wooden framing trusses.
3. Repeat for all fastener locations.
English
Loading ...
Loading ...
Loading ...