Loading ...
Loading ...
Loading ...
10
4. Repeat the steps above for each Z-Bracket.
+
-
Install Solar Panel to Mounting Surface
Selecting the Mounting Location
● Select a suitable location for the installation of the solar panel.
● Install the solar panel in a clear location on the roof of the RV that will receive maximum
exposure to the sun.
● Solar panels should be mounted as far away from rooftop obstructions (AC units, plumbing
vents, skylights, etc.) as possible.
● If solar panels must be installed near rooftop obstructions, try to orient the modules with
broadside facing the obstruction.
Selecting the Proper Mounting Structure and Hardware
● Observe all instructions and safety precautions included with the mounting system to be
used with the solar panel.
● Do not drill holes in the glass surface of the solar panel. Doing so will void the warranty.
● Do not drill additional mounting holes in the solar panel frame. Doing so will void the warranty.
● Solar panels must be securely attached to the mounting structure using four mounting points
for normal installation.
● The mounting structure and hardware must be made of durable, corrosion, and UV-resistant
materials.
● Select mounting location such that screw holes on the mounting brackets attached to the
solar panel frame are aligned with the structural framing of the roof.
Mounting Solar Panels
● In regions with heavy snowfall in winter, select the height of the mounting system so that the
lowest edge of the solar panel is not covered by snow for any extended period of time.
● Solar panels must be securely attached to the mounting structure.
● Provide adequate ventilation under the solar panel.
● Before installing solar panels on a roof, ensure that the roof construction is suitable. In
addition, any roof penetration required to mount the solar panel must be properly sealed to
prevent leaks.
English
Loading ...
Loading ...
Loading ...