Loading ...
Loading ...
Loading ...
12. Select a Timed Dry heated cycle, and start the dryer. Do not
select the Air Only Temperature setting.
If the dryer will not start, check the following:
• Dryer is plugged into a grounded 3 prong outlet.
• Electrical supplyis connected.
• Household fuse is intact and tight, or circuit breaker has
not tripped.
• Dryer door is closed.
13. When the dryer has been running for 5 minutes, open the
dryer door and feel for heat. If you feel heat, cancel cycle and
close door. If you do not feel heat, turn off the dryer and
check that the gas supply line shutoff valve is open.
• If the gas supply line shutoff valve is closed, open it, then
repeat the 5-minute test as outlined above.
• If the gas supply line shutoff valve is open, contact a
qualified technician.
DRYER USE
Power TIMED CYCLES Normal. °Casual OPTIONS
@ O 8eddi.g ...... Wrinkle O• ii!i!I , Ultra Delicate Guard 150
_. ....... 0..o
i_ Signal
Sounds
Rack Dry
MODIFIERS
Timed
Cycle
Loud
So't
Olf
(9 "+
1%}mperature Dryness Level Cycle Signal
_s_u_s !_,_c, c_s _,_ ¸ _=,r_,c_c, !_,_L, ........HOLD_OLOC_
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry in dryer and shut door.
3. Press the POWER button. Then rotate the dial to select the
desired Auto or SteamCare Cycle. Press button on left of dial
to select the desired Timed Cycle. The indicator light for the
selected Auto or Timed Cycle will glow green. The indicator
light for the selected SteamCare Cycle will glow blue.
The preset modifiers for the selected cycle will glow green.
Selectable options will glow amber. If an option or modifier is
unavailable with the selected cycle, the light will not
illuminate. The estimated or actual cycle time (in minutes) will
show in the display.
To use an Auto Cycle
NOTE: A light next to each feature will glow green when the
feature is selected or will glow amber when the feature is
selectable.
Select an Auto Cycle.
Select DRYNESS LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
15
Loading ...
Loading ...
Loading ...