Loading ...
Loading ...
Loading ...
Making small adjustments between doors.
If the doorof the freezer is lower than that of the If the door of freezer is higher than that of the
refrigerator, refrigerator.
f _, f
J
Please open the doors and adjust the doors as follows:
1) Releasethe nut (@)on the lower hinge until the upper end of the bolt (@).
tdjustment part
(_ When you release the nut(@), use enclosed hex wrench (@)to turn the bolt(@) a little counter-
NOTE clockwise to make the nut(@) loose with your fingers.
F
® WRENCH ® WRENCH
.j "'..
d) NUT
d_ NUT #) BOLT @ BOLT
2) Please adjust the height difference between the doors turning the bolt ((_) turn clockwise(_ ) or counter
clockwise ( _ ).
(_ When you turn clockwise ( _ ), the door goes up.
NOTE
f
® WRENCH ® WRENCH
.. ;./ ,,.
..... ..- .. ......
#) BOLT #) BOLT
3) After adjusting the doors, turn the nut (@)turn clockwise( _ ) until the lower end of the bolt, then tight-
en the bolt again with the wrench (3_)to fix the nut(_)).
f
® WRENCH ® WRENCH
d) NUT
cr
NOTE
@ BOLT
If you do not fix the nut (@)firmly, the bolt (@) may be released.
25
dh NUT
#) BOLT
Loading ...
Loading ...
Loading ...