Loading ...
Loading ...
Loading ...
19
OPERATION
Insert the battery (Fig. J)
1. Open the battery flap 7 on the motor head 2.
2. Slide the battery into the battery holder 6.
3. Check that the battery is firmly seated.
4. Close the battery flap 7 on the motor head 2.
Filter
Usage
- For coarse debris and demolition waste, use the HEPA filter cartridge 20 only.
- For vacuuming water, sludge, or soaked debris, use the foam filter 21.
- For fine dust and for general household use, install both HPEA filter 20 and dust bag 14.
Insert the HEPA filter cartridge (Fig. K)
1. Dismantle the motor head 2 (see chapter Dismantling the motor head).
2. Place the motor head 2 upside down on a level surface. If a foam filter 21 is installed,
remove it (see chapter Removing the foam filter)
3. Place the HEPA filter cartridge 20 on the filter holder.
4. Insert the filter locking screw through the HEPA filter cartridge 20 into the filter holder.
5. Tighten the filter locking screw clockwise.
6. Assemble the motor head 2 (see chapter Assembling the motor head).
Remove the HEPA filter cartridge (Fig. L)
1. Dismantle the motor head 2 (see chapter Dismantling the motor head).
2. Place the motor head 2 upside down on a level surface.
3. Turn the filter locking screw 19 counterclockwise and pull it out.
4. Pull the HEPA filter cartridge 20 out of the filter holder.
Insert foam filter
1. Detach the motor head 2 (see chapter Detaching the motor head).
2. Place the motor head 2 upside down on a level surface.
If the HEPA filter cartridge 20 is installed, remove it (see chapter Removing the HEPA
filter cartridge)
3. Carefully pull the open side of the foam filter 21 onto the filter holder. Do not pull too
hard to prevent tearing.
4. Assemble the motor head 2 (see chapter Assembling the motor head).
Remove the foam filter
1. Detach the motor head 2 (see chapter Detaching the motor head).
2. Place the motor head 2 upside down on a level surface.
3. Carefully pull the foam filter 21 off the filter holder.
Loading ...
Loading ...
Loading ...