Loading ...
Loading ...
Loading ...
12
FINAL INSTALLATION
1. Align the canopy (E) over the loose mounting bracket
screws (J) preassembled on mounting bracket (D)
and turn canopy (E) in a clockwise direction.
Secure the canopy (E) with the mounting bracket
screws (J) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (J) securely.
2. Partially insert three blade screws (BB) along with
three blade washers (CC) through one blade (R) and
into one blade arm (Q). Tighten each blade screw
(BB) with a Phillips screwdriver (not included), starting
with the one in the middle. Repeat this step for the
remaining blades (R) and blade arms (Q).
Hardware Used
BB
Blade Screw x 15
CC
Blade Washer x 15
3. Insert blade arm (Q) through slot in the side of the
motor assembly (G). Align the holes of one blade arm
(Q) with three motor screw holes in underside of the
motor assembly (G). Secure with three motor screws
(XX). Repeat this step for the remaining blade arms
(Q).
Hardware Used
XX
Motor Screw x 15
E
CC
R
BB
Q
J
1
2
3
XX
G
Q
Loading ...
Loading ...
Loading ...