Loading ...
Loading ...
Loading ...
IENGLISH]
Preparing
+ Amount of continuous recording time depends on:
- Which model of battery pack you are using.
- How much you use the Zoom function,
tt is, therefore, recommended that you have several available,
• Charging the Battery Pack
1. Connect the AC power adaptor to a wall socket.
2. Attach the battery pack to the AC power adaptor by aligning it
with the left of the AC power adaptor, pressing down on
the battery and sliding it to the right.
- The CHARGE/REFRESH indicator flashes red.
- When the battery pack is fully charged, the red
CHARGE indicator comes on (not flashing).
Note: If the DC Cable is plugged into the AC power adaptor,
the battery will not be charged.
• Connect the Battery Pack to the camcorder
3, Once the battery pack has been completely charged,
you can attach it to the camcorder.
- Lift the viewfioder up so that it is not in the way.
- Align the bottom of battery pack (end opposite the tab
with the red dot) with the bottom of the battery
compartment on the rear of the camcorder.
- Push the top of the battery into the compartment
until it clicks twice into place.
- Make sure that the battery pack is fitted firmly into
place to avoid damage by dropping.
4, To set the camcorder to the Camera mode,
a. Hold down the tab of the switch and push the
switch to the CAMERAposition.
b, Set the LOCK/STANDBYswitch to STANDBY.
c. Make sure that the Lens Cap is open.
(On models SCA35/A85 the Lens Cap opens
automatically when you set the power
switch to the CAMERAposition)
d, Make sure that the image appears inthe viewfinder,
• Removal of the Battery Pack
1, Carefully supporting the battery pack, slide the BATT,EJECT
button in the direction of the arrow, until the battery is released,
2. Pull out the battery pack carefully,
A
4-a 4-b
Loading ...
Loading ...
Loading ...